Lot! Cooltron Reco 60 EVO2 ventilation unit with heat recovery – reduces heat loss, pollen, humidity and carbon dioxide, creating a pleasant indoor climate!, Orimattila

Cooltron Reco 60 EVO2 ventilation unit with heat recovery

Warranty: 1 year for the unit, 3 years for the motor!

EVO 2 is an updated version of the popular Cooltron Reco 60 room-specific ventilation unit. Minimalist matt white design and a new stylish remote control.

The highly popular Reco 60 ventilation unit was updated to create the Reco 60 EVO2. The unit now has a stylish matt white finish that blends even better with the interiors of Finnish homes. The EVO2 ventilation unit can be discreetly connected directly to a 230 V mains supply. The unit is still supplied with a plug, which is the primary connection option. A completely new and even more stylish remote control has also been developed for the unit.

In detached houses, ventilation accounts for approximately 30–40% of energy consumption; with the Reco 60 EVO2 ventilation unit, you can recover up to 90% of this energy. The Cooltron Reco 60 ventilation unit easily converts natural ventilation into mechanical ventilation. The unit is designed to provide continuous, controlled ventilation in the space where it is installed, bringing fresh air in and extracting stale air. The ceramic heat exchanger recovers heat from extracted air with efficiency of up to 90%, so in addition to fresh indoor air, you can save on heating costs. In summer, the Reco 60 reduces the need for air-source heat-pump cooling, as extracted air cools the warm incoming air in the heat exchanger.

The Reco 60 is particularly well suited to garages, storage rooms and holiday homes, for example. It can also improve ventilation in detached houses with natural ventilation. Larger spaces may require several units to achieve adequate ventilation. In that case, the units’ operating cycles can be timed so that some blow out while others blow in at the same time.

The ventilation unit is designed for installation through a wall. Its telescopic construction allows installation in wall structures 250–400 mm thick. A hole with a diameter of 165 mm is required in the wall. The unit is easy to connect to electricity directly from a socket using the plug.

The ventilation unit is designed for continuous operation, so it should always remain connected to the mains. The unit is controlled using the supplied remote control or the buttons on its edge. The unit significantly reduces heat loss, pollen, humidity and carbon dioxide, creating a pleasant indoor climate. The unit can be fitted with a separately sold HEPA 11 filter, which efficiently removes allergenic particles from indoor air.

Ventilation unit operating modes

• Fresh Air Mode supplies fresh air indoors

• Exhaust Mode extracts air from the space

• Cycle Mode alternates between supply and extraction in 65-second cycles

• Humidity Mode controls the fan based on humidity

• Fan: 3 speeds

Technical specifications:

• Maximum power consumption: 6 W

• Operating voltage: 110–240 V, 50/60 Hz

• Plug connection, 1 m connecting cable

• Maximum airflow: 60 m³/h

• Sound pressure: 20–30 dB

• Heat recovery efficiency: 90%

• Dimensions: 24.2 × 24.2 × 5.6 cm (part remaining outside the wall surface)

• Weight: 2.8 kg

• Suitable for spaces: 10–20 m²

• Material: ABS plastic, ceramic heat exchanger

• Colour: matt white

• Warranty: 1 year for the unit, 3 years for the motor

Delivery: Posti/Matkahuolto. Collection is not possible.