Heat-retaining stove, complete accessory package, Warma-Uunit Valkea 100, Uusikaupunki

Valkea 100 Basic heat-retaining stove with steel door and sharp front corners (accessory package without installation)

RRP with these specifications (accessory package with double flue circulation, lighting damper and sharp front corners) €4,495

Valkea 100 Basic is a modern heat-retaining stove. The large glass door of this approximately one-metre-wide stove provides a broad, atmospheric view of the fire. The spacious firebox comfortably accommodates slightly longer logs placed crosswise. Thanks to its white mortar finish and large glazed door, the stove suits many environments. If white is not to your liking, the mortar finish can be painted any colour, for example with Teknoksen Super Latex paint. The high-quality, precisely dimensioned elements are manufactured from highly heat-retentive refractory material at Warma-Uunit Oy’s factory in Uusikaupunki.

NOTE! This is not a ready-to-use stove, but an accessory package from which the stove can be installed. Very clear installation instructions are included. If necessary, installation advice is also available from the factory by telephone on weekdays during office hours.

If collection is only possible later, storage is available at a small cost of €50 / month until the summer.

You can also order various accessories separately for the product before collection. These include, for example, additional height extensions. Ask the factory for more information if necessary.

Valkea 100 Basic includes all wool insulation, mortars, coating mortars, doors and other accessories needed to install the stove. The delivery also includes fibreglass mesh for the coating. The flue is naturally not included.

The environmental friendliness and efficiency of Warma-Uunit’s Puupihi fireplaces are based on a patented air supply system and a highly heat-retentive structure, allowing maximum benefit to be obtained even from a small amount of wood.

Valkea 100 Basic heat-retaining stove

• Height: approx. 1,700 mm

• Width: 970 mm + coating

• Weight: approx. 1,250 kg

• Heating area: 40–70 m²

• Flue size: min. ⌀150 mm, or half-brick flue, T400 (Note! For new flues, regulation requires T600. The flue temperature class may be subject to location-specific requirements set by building control authorities), see more here

• Coating material: Antique mortar

• CE approved

• Meets the requirements of the Ecodesign Directive

• CO emissions: 0.12%

• Flue gas temperature: 158 °C

• Safety distance to the sides and rear: 100 mm

• Firewood quantity: 6 kg

• Efficiency: 81%

• Heat release time: approx. 24 hours

• Energy class: A+

Specifications and additional information for the model for sale:

• Top or upper connection (flue connection on the upper part of the stove, from the side or rear, or flue above the stove)

• Lighting damper for bypassing the smoke circulation

• Body elements, installation wool and fibreglass mesh

• Additional elements for the front corners = sharp front corners

• Mortars required for installation (masonry mortar, fire mortar, mesh mortar, antique mortar)

• Puupihi fireplace with a traditional cast-iron grate (grates included in the sale)

• Black steel three-part lower set (soot doors and ash box with cover)

• Black steel glass door

• Installation instructions

  
  

Shipping: 3 Euro pallets

Affordable fireplace, affordable stove, cheap fireplace, cheap stove