Steel-framed storage hall 25 m x 40.3 m (1007.5 m²), Lieto

Viewed 197 times

1 / 1

For Sale

Please note that this is an automatic translation. In case of any discrepancies between the original and this translated version, the original version shall prevail.

Steel frame for an industrial/storage hall 25 x 40.3 m (1007.5 m²) – Structural calculation report by an engineering firm to Eurocode – Lieto, see attachment

Description:
An auctioned dismantled steel-framed storage hall, dimensioned for re-erection. Of the hall's original three frame sections, expert inspection has formed two very robust halls that meet modern Eurocode requirements.

This item comprises the steel frame package stored in Lieto.

Strength Calculated & Approved: Sweco Finland Oy has carried out the frame sizing and stability analysis (Eurocode EN 1990, EN 1991, EN 1993). With a tightened 2 m frame spacing, the steel frame withstands local snow and wind loads flawlessly without expensive additional reinforcement. The tighter frame spacing has not been taken into account in the frame bracing.
Inspection & Loading: The frame can be inspected on site in Lieto free of charge before submitting a bid. On collection, the buyer will be assisted with loading if needed!

Technical details (Lieto):

Main dimensions: Width 25.0 m x Length 40.3 m
Area: 1007.5 m² (Volume 6,698 m³)
Clear height / Eaves height: 4.0 m / 4.9 m
Ridge height / Roof pitch: 8.1 m / 14.4°
Frame structure: High-quality steel truss frames made from structural tubes (S355J2H, flats S355J2+N)
Frame spacing in design: 2.0 m
Snow load / Wind load (Eurocode): Snow on roof 2.08 kN/m², wind load 0.61 kN/m²
Included: Steel truss frames, intermediate purlins, roof and wall bracing, plus Sweco's official calculation report and foundation planning instructions for asphalt anchoring.

Location and inspection: Luolakalliontie 28, 21420 LIETO.

Terms of Sale

The seller reserves the right to accept or reject the highest bid.

The item is sold as a transaction between users. Huutokaupat.com does not act as a party to the transaction.

Bids must be submitted by the stated deadline. The highest bid is the bid that the seller has accepted as the highest. It is also possible to participate in the auction in person by submitting a bid to the seller on site. The seller and buyer undertake to enter all bids into the system. By placing a bid, the bidder accepts these terms of sale when making the bid.

Viewing the property

Before placing a bid, the bidder is obliged to inspect the property in question, the documents and the records. The buyer may not later invoke any matter that could have been discovered in the pre-inspection.

Information provided by the seller

The seller warrants that they have provided the buyer with all information known to the seller and that can be assumed to affect the sale.

Conclusion of the sale

The sale of the property must be made in the form prescribed by the Land Code. The time and place of signing the deed will be agreed separately with the buyer. Payment of the purchase price takes place at the closing. The fee of the authorised conveyancer shall be paid half by the seller and half by the buyer.

Other costs

The buyer is responsible for transfer tax in accordance with the tax practice in force at any given time.

Withdrawal from the sale

A party who refuses to complete the sale shall, under the Land Code, compensate the other party for reasonable costs incurred from advertising, inspection of the property, and other necessary measures related to the sale.