Heat-retaining stove, complete accessory kit — Warma-Uunit Valkea 75 with steel door, Uusikaupunki

Heat-retaining stove Valkea 75 Basic with steel door (accessory kit, no installation)

RRP with these accessories (accessory kit with double flue circuit and ignition plate) €3,235

The Valkea Basic with steel door is a slim heat-retaining stove yet a very effective heater. Its white plaster finish and large glazed door make it suit many interiors. If the white colour is not desired, the stove can be painted any colour, e.g. with Teknos superlatex paint. High-quality, precisely sized elements are made from a highly heat-retentive refractory mass at Warma-Uunit Oy’s Uusikaupunki factory.

NOTE! This is not a ready-to-use stove but an accessory kit from which a stove can be assembled. Very clear assembly instructions are included. If needed, assembly advice is also available by phone from the factory during office hours on weekdays.

If pickup is only possible later, storage is available until summer for a small fee of €50 / month.

You can order various extra accessories for the product separately before pickup. Such accessories include additional risers. Ask the factory for details if needed.

The Valkea 75 Basic with steel door includes all insulation wool, mortars, finishing plasters, doors and other accessories needed for installation. The accessory delivery also includes a glass-fibre mesh for the finish. The flue is not, of course, included.

Warma-Uunit’s Puupihi appliances’ environmental performance and efficiency are based on a patented air-supply system and a very heat-retentive structure, which ensure maximum benefit even from a small amount of wood.

Valkea 75 Basic heat-retaining stove

• Height: approx. 1700 mm

• Width: 750 mm + finish

• Weight: approx. 1100 kg

• Heating area: 35–60 m²

• Flue size: min. ⌀150 mm, or half-brick flue, T400 (Note! For new flues the regulation requirement is T600. Flue temperature class may have local building control requirements), see more here

• Finishing material: Antique plaster

• CE-approved

• Meets Ecodesign Directive requirements

• CO emissions: 0.07 %

• Flue gas temperature: 128 °C

• Safety distance to sides and rear: 100 mm

• Firewood amount: 6 kg

• Efficiency: 88 %

• Heat release time: approx. 24 h

• Energy class: A+

Equipment and additional information for the model for sale:

• Top or rear flue connection (flue connection from the stove’s top, side or rear, or flue above the stove)

• Ignition aid plate to bypass the smoke circuit

• Body elements, installation insulation and glass-fibre mesh

• Mortars required for installation (masonry mortar, fire mortar, mesh mortar and antique plaster)

• Puupihi appliance with traditional cast-iron slatted grate (grates included in the sale)

• Three-piece steel base painted black (soot doors and ash box with lids)

• Steel, black glazed door

• Assembly instructions

• Other optional accessories available separately can be requested from the factory

  
  

Delivery: 2 euro pallets

Affordable fireplace, inexpensive stove, cheap fireplace, cheap stove