12-metre tubular pontoon jetty - ready to use, Hirvensalmi

Quality tube-pontoon jetty 6 x 3.1 metres, Ø 400 mm + walkway 6 x 1.2 metres - total length 12 metres (DISPLAY MODEL)

A very popular jetty. Its large surface area and low deck height make it pleasantly stable. High-quality components complete the product.

Side cladding with three boards creates a stylish appearance. Decking is 2nd grade (faded, may have small cracks and dirt - oiling will restore like new).

The product has been displayed outdoors. The 6-metre walkway allows the jetty to reach further in shallow water.

Accessories:

(Accessories may show minor signs of use, scratches, etc.)

• Side-clad with three boards (28×120 mm)

• 6-step BLACK folding swimming ladder (incl. mounting lever) - stainless steel (powder-coated black)

• 2 x cross bollards BLACK - stainless steel (powder-coated black)

• 1 x 150 cm table - stainless steel (powder-coated black)

• 1 x 150 cm bench - stainless steel (powder-coated black)

• 5 x MF40 grey fenders

NOTICE! The 2 clear cross bollards shown in the photos ARE NOT INCLUDED!

* Suitable for overwintering in the water

* Well suited for swimming, leisure and boat use

* Stylish and representative jetty

* If required, we can also deliver and install it on a ‘turnkey’ basis

* We can store the product free of charge until 30 September 2026

Detailed product information:

• Total length: 12 m

• Width: 3.10 m

• Deck section size: 6 x 3.10 m

• Walkway size: 6 x 1.2 m

• Total weight: approx. 950 kg

• Draft without load: approx. 20 cm

• Deck height above water without load: approx. 40 cm

• Tube pontoon diameter: Ø 400 mm

• Pontoon wall thickness: 9.8 mm

• Deck-section tube pontoons: 2 pcs (5800 mm)

• Walkway tube pontoon: 1 pc (1200 mm)

• Tube pontoons are made of strong, frost- and ice-resistant HDPE

• Pontoons also resist abrasion well

• Frame fixed with plastic flanges, will not loosen or rust

• Frame: pressure-treated timber (48×123 mm)

• Cross frame: heavy pressure-treated timber (100×100 mm)

• Decking: pressure-treated boards (28×120 mm)

• Side-clad with three boards (28×120 mm)

• Deck boards fastened with stainless steel screws

• All metal parts are hot-dip galvanised steel

• Can also be installed as a T-shaped jetty

• Anchor rings at the shore end for chains

• Anchor rings at the lake end for chains