Heat‑retaining fireplace, complete accessory kit, Warma‑Uunit Valkea 100, Uusikaupunki

Heat‑retaining fireplace Valkea 100 Basic with a steel glass door and sharp front corners (accessory kit without installation)

RRP with these accessories (accessory kit with double circulation, ignition plate and sharp front corners) €4,495

The Valkea 100 Basic is a modern heat‑retaining fireplace. The large glass door of this roughly one‑metre‑wide fireplace opens up an extensive, atmospheric view of the fire. The large firebox comfortably fits even a slightly longer log placed crosswise. Thanks to the white plaster surface and the large glass door the fireplace suits many environments. If you do not like the white colour, the plaster surface can be painted with your chosen colour, e.g. with Teknoksen super‑latex paint. High‑quality, dimensionally accurate elements are manufactured from a very heat‑storing refractory mass at Warma‑Uunit Oy’s factory in Uusikaupunki.

NOTE! This is not a ready‑to‑use fireplace but an accessory kit from which the fireplace can be assembled. Very clear installation instructions are included. If necessary, installation advice is available by phone from the factory during office hours on weekdays.

If collection is only possible later, storage is available until summer for a small fee of €50 per month.

You may also order various additional accessories for the product before collection. Such accessories include, for example, extra height elements. Ask the factory for details if needed.

The Valkea 100 Basic includes all insulation, mortars, finishing mortars, doors and other accessories required for installation. The accessory delivery also includes glass‑fibre mesh for the finishing. The flue is, naturally, not included.

Warma‑Uunit’s Puupihi fireplaces’ environmental friendliness and efficiency are based on a patented air supply system and a very heat‑storing structure, which together maximise the output even from a small amount of wood.

Valkea 100 Basic — technical data

• Height: approx. 1,700 mm

• Width: 970 mm + finishing

• Weight: approx. 1,250 kg

• Heating area: 40–70 m²

• Flue size: min. Ø 150 mm, or half‑brick flue, T400 (Note! For new flues the regulation requirement is T600. Flue temperature class may be subject to local building control requirements), see more here

• Finishing material: antique plaster

• CE approved

• Meets the Ecodesign Directive requirements

• CO emissions: 0.12 %

• Flue gas temperature: 158 °C

• Safety distance to sides and rear: 100 mm

• Firewood amount: 6 kg

• Efficiency: 81 %

• Heat emission time: approx. 24 h

• Energy class: A+

Accessories and additional information for the sold model:

• Top or rear flue connection (flue connection from the top, side or rear, or a flue above the fireplace)

• Ignition aid flap to bypass the smoke circulation

• Body elements, installation insulation and glass‑fibre mesh

• Extra elements for the front corners = sharp front corners

• Mortars required for installation (masonry mortar, fire mortar, mesh mortar, antique mortar)

• Puupihi hearth with a traditional cast‑iron slotted grate (slotted grates are included)

• Steel, black 3‑piece lower set (soot doors and ash box with lids)

• Steel, black glass door

• Installation instructions

  
  

Delivery: 3 Euro pallets

Affordable stove, affordable fireplace, cheap stove, cheap fireplace