Tubular pontoon jetty 6 x 3.15 metres + gangway 5 x 1.2 metres (DIY), Hirvensalmi

Quality jetty delivered in parts - save by assembling it yourself!

A very popular jetty. Its large surface area and low deck height give it good stability. Quality components finish the product.

Side cladding with two boards creates a stylish appearance. Decking: green or brown smooth durable timber.

Tubular pontoon jetty 6 x 3.15 metres (Ø 400 mm) + gangway 5 x 1.2 metres delivered in parts

* Can overwinter in the water

* Well suited for swimming, leisure and boating use

* Stylish and representative jetty

* Quality components

* Colour: green or brown durable timber

* Side-clad with two boards (28 x 145 mm)

* If needed, we can also build the product ready, deliver and install it "turnkey"

* We can store the product free of charge until the end of September 2026

* The jetty is delivered in parts and can easily be assembled by yourself (timber cut to length except for side cladding boards)

* Can be transported easily on an open trailer at least 3.5 m long (best on a flatbed trailer, e.g. car trailer) - we assist with packaging

The assembled jetty's normal price is €5,450!

Product details:

• Total surface area: 24.9 m²

• Total length: 11 m

• Width: 3.15 m

• Deck section size: 6 x 3.15 m (length × width)

• Gangway size: 5 x 1.2 m (length × width)

• Total weight: approx. 950 kg

• Draft without load: approx. 20 cm

• Deck height from water without load: approx. 40 cm

• Pontoon tube diameter: Ø 400 mm

• Pontoon wall thickness: 9.8 mm

• Deck section pontoon tubes: 2 pcs (5,800 mm)

• Gangway pontoon tubes: 1 pc (1,200 mm)

• Pontoon tubes are made of strong, frost- and ice-resistant HDPE plastic

• Pontoon tubes also resist abrasion well

• Frame fixed with plastic flanges, will not loosen or rust

• Frame: pressure-treated timber (48 × 123 mm)

• Transverse frame: sturdy pressure-treated timber (100 × 100 mm)

• Deck: pressure-treated boards (28 × 120 mm)

• Deck board material: green or brown smooth durable timber

• Side-clad with two boards (28 × 145 mm)

• Deck boards fastened with stainless steel screws

• All metal parts are hot-dip galvanised steel

• Can also be installed as a T-shaped jetty

• Anchoring loops at the landward end for chains

• Anchoring loops at the lake-facing end for chains

• Easy to assemble, instructions included!

Images include accessories (swim ladder, railings, anchoring equipment, 3-board cladding, bollards, etc.) and are example images of the finished product.