Heat-storing fireplace, full accessory kit, Warma-Uunit Fiona 100 with display door, Uusikaupunki

Heat-storing fireplace Fiona 100 (accessory kit without installation)

RRP with these accessories (double circulation and ignition flap) €5,390

The Fiona 100 is a modern heat-storing fireplace. The large glass door of the roughly one-metre-wide stove gives a wide, atmospheric view of the fire. The generous firebox can comfortably hold a slightly longer log laid crosswise. With its white render finish and large flush-mounted glazed door the stove suits many interiors. If white is not desirable, the stove can be painted with a colour of your choice, e.g. with Teknoksen superlatex paint. High-quality, precision-made elements are manufactured from a very heat-retentive refractory compound at Warma-Uunit Oy's factory in Uusikaupunki.

NOTE! This is not a ready-to-use stove but an accessory kit from which a stove can be built. Very clear installation instructions are included. If needed, installation advice is available from the factory by phone during office hours.

You can also order various accessories separately for the product before collection — for example extra risers. Ask the factory for details if needed.

Fiona 100 includes all insulation wool, mortars, finishing renders, doors and other accessories needed for installation. The supply also includes glass fibre mesh for the finish. NOTE! The door is a showroom display door which has not been used for burning. The black lower lids are also display samples. The door has no warranty. The flue is not included in the delivery.

Warma-Uunit's Puupihi appliances' environmental friendliness and efficiency are based on a patented air-supply system and a highly heat-retentive construction, which extract maximum benefit even from a small amount of wood.

Heat-storing fireplace Fiona 100

• Height: approx. 1,700 mm

• Width: 970 mm + coating

• Weight: approx. 1,250 kg

• Heating area: 40–70 m²

• Flue size: min. Ø 150 mm, or half-brick flue, T400 (Note! For new flues the regulation requirement is T600. The flue temperature class may have local building control requirements), see more here

• Coating material: antique render

• CE-approved

• Meets Ecodesign Directive requirements

• CO emissions: 0.12%

• Flue gas temperature: 158 °C

• Safety distance to sides and rear: 100 mm

• Firewood quantity: 6 kg

• Efficiency: 81%

• Heat release time: approx. 24 h

• Energy class: A+

Equipment of the model for sale and additional information:

• Top or rear flue connection (flue connection from the top, side or rear, or flue above the stove)

• Ignition assist flap to bypass the smoke circulation

• Body elements, installation insulation wool and glass fibre mesh

• Mortars required for installation (masonry mortar, refractory mortar, mesh mortar and antique render)

• Puupihi appliance with traditional cast-iron slotted grate (grates included)

• Steel, black 3-piece lower section (soot flaps and ash box with lids)

• Steel, black recessed glass door (display model door, not used for burning; may show some minor marks, no warranty on the door)

• Installation instructions

  
  

Delivery: 3 euro pallets