AdBlue® urea additive 210 L, Kurikka

Benefits

• Non-toxic

• Non-flammable

• Biodegradable

• Not classified as dangerous for transport under road (ADR), rail (RID), inland waterway (ADNR) or maritime (IMDG) regulations

• Meets the following emissions requirements: Euro 4, Euro 5 and Euro 6

• No effect on servicing or oil-change intervals

• Water hazard class 1

Product information

• Clear 32.5% urea solution

• Manufactured in accordance with ISO 22241

• For vehicles with SCR technology

• Limited suitability when using biodiesel

• Fuel savings approximately the same as when using AdBlue® additive

• Corrosive (corrodes metal)

• Evaporates from +80 °C

• Freezing point −11 °C, after which AdBlue® crystallises

• Maximum storage time at a constant temperature

• 36 months ≤ 10 °C

• 18 months ≤ 25 °C

• 12 months ≤ 30 °C

• 6 months ≤ 35 °C

• AdBlue® is a registered trademark of the German Association of the Automotive Industry (VDA)

Product description

• AdBlue® urea additive 210 L

• AdBlue® is a highly pure NOx-reducing agent (reducing nitrogen oxide emissions) suitable for diesel engines with SCR technology.

• SCR technology (selective catalytic reduction) is a technique in which nitrogen oxide emissions are reduced using a catalyst. Health-hazardous nitrogen oxide emissions are reduced with a selected reducing agent (AdBlue®), producing nitrogen and water.

• SCR technology was developed for commercial vehicles, where it reduces health-hazardous nitrogen oxides and diesel particulates in exhaust gases, thereby improving fuel efficiency.

• SCR technology meets the Euro 4 and Euro 5 emissions classifications.

• AdBlue® solution contains:

• 32.5% urea solution, clear water-based solution.

• Non-toxic

• Non-flammable

• Biodegradable

• AdBlue® solution may be transported by road or sea, with very few risks associated with its transport.

• Crystallises at −11 °C

• Evaporates at 80 °C.

• Corrosive (metal)

• Technical information:

• Shelf life up to 1 year (maximum temperature 40–50 °C)

• Contamination of the AdBlue® solution must be prevented. Keep the equipment clean and dust-free, and ensure that the seal on the AdBlue® tank and packaging is in place and undamaged.

• Replace the AdBlue® solution and filter if the vehicle has been stored for an extended period.