Lot! Cooltron Reco 60 EVO2 heat-recovery ventilation unit – reduces heat loss, pollen, humidity and carbon dioxide, creating pleasant indoor air!, Orimattila

Cooltron Reco 60 EVO2 heat-recovery ventilation unit

Warranty: 1 year for the unit, 3 years for the motor!

EVO 2 is an updated version of the popular Cooltron Reco 60 room-specific ventilation unit. Minimalist matt white design and a new stylish remote control.

The highly popular Reco 60 ventilation unit has been updated to create the Reco 60 EVO2. The unit has a stylish matt white finish that blends even better with Finnish home interiors. The EVO2 ventilation unit can be discreetly connected directly to a 230 V electrical network. The unit is still supplied with a plug, which is the preferred connection option. A completely new and even more stylish remote control has also been developed.

In detached houses, ventilation accounts for approximately 30–40% of energy consumption; with the Reco 60 EVO2 ventilation unit, you can recover up to 90% of this energy. The Cooltron Reco 60 ventilation unit easily converts gravity ventilation into mechanical ventilation. The unit is designed to provide continuous, controlled ventilation in the installed space, bringing fresh air in and removing stale air. The unit’s ceramic heat exchanger recovers heat from extracted air with efficiency of up to 90%, so in addition to fresh indoor air, you can save on heating costs. In summer, Reco 60 reduces the need for air-source heat-pump cooling, as extracted air cools the warm incoming air in the heat exchanger.

Reco 60 is particularly well suited to garages, storage areas and holiday homes, for example. It can also improve ventilation in detached houses with gravity ventilation. Larger spaces may require several units to achieve sufficient ventilation. In this case, the units’ operating cycles can be timed so that some blow out while others blow in at the same time.

The ventilation unit is designed for installation through a wall. Its telescopic construction allows installation in wall structures 250–400 mm thick. A hole with a diameter of 165 mm is required in the wall. The unit is easy to connect to the electricity supply using the plug, directly from a socket.

The ventilation unit is designed for continuous use and should therefore remain connected to the mains at all times. The unit is controlled with the supplied remote control or the buttons on its edge. The unit significantly reduces heat loss, pollen, humidity and carbon dioxide, creating pleasant indoor air. It can be fitted with a separately sold HEPA 11 filter, which effectively removes allergenic particles from room air.

Ventilation unit operating modes

• Fresh Air Mode supplies fresh air indoors

• Exhaust Mode removes air from the space

• Cycle Mode alternates between supply and exhaust modes in a 65-second cycle

• Humidity Mode controls the fan based on air humidity

• Fan: 3 speeds

Technical specifications:

• Max. power consumption: 6 W

• Operating voltage: 110–240 V, 50/60 Hz

• Plug connection, 1 m connection cable

• Max. airflow: 60 m³/h

• Sound pressure: 20–30 dB

• Heat-recovery efficiency: 90%

• Dimensions: 24.2 × 24.2 × 5.6 cm (part remaining outside the wall)

• Weight: 2.8 kg

• Suitable for spaces: 10–20 m²

• Material: ABS plastic, ceramic heat exchanger

• Colour: matt white

• Warranty: 1 year for the unit, 3 years for the motor

Delivery: Posti/Matkahuolto. Collection not available.