Honda CBR, 1997, 48,000 km, Oulu

Slightly different from a standard Fireblade and more powerful!

The engine was rebuilt about 8,000 km ago.

- Engine bored out to 980 cc oversize (so-called "big bore") with forged Wisecon pistons

- More aggressive Megacycle camshafts

- Factory Pro ignition advance gear

- Dynojet jet kit in the carburettors

- Vance & Hines slip-on silencer

- BMC high-flow air filter (washable)

- APE manual timing-chain tensioner — doesn’t rattle like many CBRs with the original tensioner that fatigues

- All carburettor seals and intake manifolds renewed during this winter

- 12 V auxiliary power outlet, e.g. for a phone

Receipts and other documentation available for the major work, and some spare parts included. For example: a second set of carburettors (4), original camshafts, a voltage regulator, etc.

Both tyres are in good condition, as seen in the photos. Oil and filter are changed every spring. Most recently changed on 12 April to Motul 10W-40 and a Hiflo filter. Plugs replaced last spring. All gears engage and stay engaged.

Sprockets and chain are also good. LED bulbs front and rear.

Fork seals and dust covers were renewed a couple of years ago, and the fork oil was changed at the same time.

The bike is not new and the fairings show signs of use, but they are intact. Original indicators can be included if wanted.

It has been with me for several years with little use — about 500 km per summer — so it should go to someone else.

Well maintained overall; just needs riding. Motor insurance is cheap — mine is only €190 per year.

No swaps!!

Previous registration number: YI-665

First registration date in Finland: 23 April 2004

Imported from: Germany

Deregistered from use: removed as damaged on 11 October 2004

The vehicle must be collected within 7 days of the auction ending unless otherwise agreed - Huutokaupat.com.