Toyota forklift mast, tractor-mounted, Salo

Toyota-branded electric forklift mast converted for tractor lifting equipment, to fit into pockets or to the front. It could also be hooked to a front loader or adapted to a small loader. The tines have manual side-shift and are forged-steel. Tine length 1100 mm. Mast height only 1900 mm — so it fits through low doorways. This is a low-lift mast: it raises the tines to the top of the mast before extending, and visibility to the tines is good. The mast's lift capacity as a forklift was 2000 kg; it will likely tolerate more. Fixed tines rated 2500 kg. The mast lifts the tines to 3300 mm from the ground when the lifting device is in mid-position at around 300 mm height. This lets you lift loads a little higher, or attach a lifting cage to the tines for painting/renovation work or other lifting tasks. It can also reach awkward spots when connected to a tractor for lifting items. The cylinders are dry and do not leak. Overall the mast is in tidy condition and is a proper unit ready for work. The mast operates up/down with single-acting hydraulics, which are available on all tractors, so it suits both older and newer tractors front or rear. The mast can be loaded onto a truck with a forklift free of charge when collected. It travels well on car trailers on its side and can be laid onto a pallet for collection. Collection times can be arranged very flexibly, including evenings and weekends. No collection fees apply; there is no rush — timing can be agreed flexibly if needed.