Pipe pontoon jetty 6 x 3.15 metres + walkway 5 x 1.2 metres (DIY), Hirvensalmi

High-quality jetty now in parts – save by building it yourself!

A very popular jetty. Its large area and low deck height make it pleasantly stable. Quality components finish the product.

Side cladding with two boards creates a stylish look. Deck boards: green or brown smooth treated timber.

Pipe pontoon jetty 6 x 3.15 metres Ø 400 mm + walkway 5 x 1.2 metres in parts

* Overwinters in the water

* Well suited for swimming, leisure and boating use

* Stylish and representative jetty

* Quality components

* Colour: green or brown treated timber

* Side-clad with two boards (28 x 145 mm)

* If required we can also build the product ready and transport and install it turnkey

* We can store the product free of charge until the end of May 2026

* The jetty is delivered in parts and can be easily assembled by yourself (timber cut to length except side cladding boards)

* Can be transported easily with an open trailer at least 3.5 m long (best is a low-loader type, e.g. car trailer) – we assist with packing

The normal assembled price of the jetty is €5,450!

Technical details:

• Total area: 24.9 m²

• Total length: 11 m

• Width: 3.15 m

• Deck section size: 6 x 3.15 m (length*width)

• Walkway size: 5 x 1.2 m (length*width)

• Total weight: approx. 950 kg

• Draft without load: approx. 20 cm

• Deck height above water without load: approx. 40 cm

• Diameter of pipe pontoons: Ø 400 mm

• Pontoons wall thickness: 9.8 mm

• Pipe pontoons for deck section: 2 pcs (5,800 mm)

• Pipe pontoon for walkway: 1 pc (1,200 mm)

• Pontoons are made of strong frost- and ice-resistant HDPE plastic

• Pontoons also resist abrasion well

• Frame fastening with plastic flanges, will not loosen or rust

• Frame: pressure-treated timber (48 × 123 mm)

• Cross beams: heavy pressure-treated timber (100 × 100 mm)

• Deck: pressure-treated boards (28 × 120 mm)

• Deck board material: green or brown smooth treated timber

• Side-clad with two boards (28 x 145 mm)

• Deck board fixings: stainless steel screws

• All metal parts are hot-dip galvanised steel

• Can also be installed in a T-shape

• Anchoring rings at the shore end for chains

• Anchoring rings at the lake-side end for chains

• Easy to assemble, instructions included!

Images include accessories (swimming ladder, railings, anchoring equipment, 3-board cladding, bollards etc.) and are example photos of the finished product.