POWERFUL Yona ozone generator + ioniser 40,000 mg/h for small and 1–400 m² spaces, new, warranty + hold mode, Kalajoki

We have a long history as servicers and sellers of ozone equipment. Ask us if you have any questions about ozone generators: 0400682012

Ozone outputs and numbers of ozone plates and power supplies

60,000 mg/h – 6 x double‑sided ozone plates and 3 power supplies.

40,000 mg/h – 4 x double‑sided ozone plates and 2 power supplies.

20,000 mg/h – 4 x single‑sided ozone plates and 1 power supply.

10,000 mg/h – 2 x single‑sided ozone plates and 1 power supply.

If the device you buy is advertised to produce negative ions, check that it contains the ion‑producing component shown in the last picture.

Information about this unit.

See at the same time what happens inside the device.

The ioniser is an essential addition to the unit: it gives you cleaner breathing air — see details at the end of the listing.

This unit features an upgraded ioniser producing 24,000,000 negative ions per cm³

DID YOU KNOW THAT AN IONISER ALSO INCREASES THE EFFECTIVENESS COMPARED TO A PURE OZONE GENERATOR

Yona ozone generators use the latest technology. Powerful ozone generators fit into a compact housing, keeping the unit portable while retaining strong output. Handy to carry and move between locations, yet powerful.

This unit contains two such ozone‑production modules (see last photos). Robust output: 40,000 mg/hour.

The Yona ozone generator does not produce toxic nitrogen oxides — the ozone produced displaces oxygen and, in an oxygen‑deprived environment, odour‑causing bacteria and viruses are destroyed.

Whether the space is large or small, this is a powerful ozone generator ready for work.

DO NOT PLAY — BUY A POWERFUL OZONE GENERATOR RIGHT AWAY

See at the same time what happens inside the device.

The faster the ozonation, the safer it is.

Suitable for cleaning cars, small spaces and even spaces over 400 m².

Simple to use: plug into the wall and set the timer 1–60 minutes or turn to HOLD (constant on), leave the area and it does the job.

SAVE TIME AND MONEY — BUY A POWERFUL OZONE GENERATOR.

Here is a comparison of ozonation times

unit:                        20,000 mg     40,000 mg

ozonation time           10 hours        5 hours

HOLD/CONTINUOUS‑ON MODE IS IMPORTANT — YOU DO NOT NEED TO KEEP ADDING TIME BETWEEN CYCLES.

The package includes instructions for, among other things, car ozonation, cabin use and ionising.

OVER 30 YEARS OF SERVICE. FAST MAINTENANCE AND SPARE PARTS AVAILABLE DIRECTLY FROM STOCK.

FAST DELIVERY

* CE APPROVED
* POWERFUL 40,000 mg / h
* TIMER: 0–60 min / HOLD = CONTINUOUS ON
* REMOVES ODOURS FROM VEGETABLES, FRUIT, KITCHENS, VIRUSES, BACTERIA, MOULDS, ETC.
* REMOVES SMOKE DAMAGE ODOURS, CHEMICAL ODOURS AND OTHER DIFFICULT ODOURS — SUITABLE FOR MOULD DAMAGE REMOVAL IN HOUSES
* STAINLESS STEEL HOUSING / PLASTIC
* REMOVES ODOURS FROM CARS, BOATS, BASEMENTS, ETC.
* DISINFECTS SAUNAS AND WASHROOMS
* USED BY MUNICIPALITIES, CITIES, CAR DEALERS, BUS OPERATORS, CONSTRUCTION COMPANIES, CLEANING COMPANIES, HOTELS, MOTELS, CAMPSITES, PLANT HIRE COMPANIES, ETC.
* VERY EASY AND SIMPLE TO USE
* INSTRUCTIONS IN FINNISH
* 12 months warranty

Dimensions: 250 × 210 × 190 mm

MAINTENANCE AND SPARE PARTS FROM US: 0400682012

ABOUT IONISATION:
Negative ions produced into indoor air cause light, positively charged airborne particles to cluster together; the resulting larger, heavier particles quickly fall out of the breathing zone.

Negative ionisation also breaks down volatile organic compounds (VOCs) in air that are harmful when inhaled. Many microbes produce toxic compounds that, when aerosolised in indoor air, become a serious health risk when they can enter the lungs and bloodstream. Heavy microbial toxins that do not mix into the air cause harm mainly via spores, which are the producers of these dangerous toxins.

The effectiveness of ozone (O3) and negative ionisation is based on high concentrations.

When a device produces negative ions in addition to ozone, its effectiveness is 5–10 times better than ozone alone, and high concentrations remove spores and odours effectively even from porous materials such as upholstered furniture and bedding.

Fine particles in indoor air pose a serious health risk in homes and workplaces.

Harmful fine particles travel with inhaled air to the deep lungs (alveoli) and into the bloodstream, causing serious health problems in addition to asthma and allergies.

Ozonation together with negative ionisation cleans indoor air of fine particles and also of bacteria, moulds, viruses and various gases.

The listed indoor air contaminants can be removed by ozone and negative ion treatment
Ozone    Negative ionisation
Chemical
Benzene
Exhaust gases
Smoke
Vegetative microbial cells    Dust
Carbon monoxide    Dead skin
Mould spores
Pollen    Nicotine
Mould spores
Gases and fumes
Bacterial spores
Viruses
Animal dander
Ammonia    VOCs (volatile organic compounds)
Tobacco smoke
MVOC compounds
Chemicals
Sewer odour    Oil smell
Fine particulate matter    Phenol
Dust mite
Propane
Stale air    Ether
Vegetative microbial cells
Sewer odour
 Bacterial spores  

    Ozonation and negative ionisation work particularly effectively in a positively pressured building.

    Ozone and negative ion treatment together form compounds that can effectively remove microbial spores and various odours, for example sewer gases, smoke smells, bacterial and mould toxins, and stubborn cooking and tobacco odours.

    Ozone and negative ionisation also remove fine particles and MVOCs (Microbial Volatile Organic Compounds) and VOCs (Volatile Organic Compounds) from the air.

    Ozonation and negative ionisation create a pleasant, easy‑to‑breathe indoor air; people do well in such a clean environment.

    Ozone and negative ion treatment together produce very clean indoor air suitable for workplaces.

Indoor ozonation cannot be performed while people are present because ozone is produced in large quantities to destroy microbial spores. The combined high ozone concentration and negative ionisation achieve good cleaning results even in porous materials. After treatment the premises are ventilated before occupants return.

You may inspect the product before the auction ends.

Products are sold in the condition they are in at the time of the auction and/or sale. There is no warranty for auction items unless explicitly stated. The descriptions in the listing are the seller's estimates of condition. The buyer must inspect the item's condition and functionality before placing a binding bid. If the buyer does not accept these auction terms they should not bid. The seller reserves the right to accept or reject the highest bid.

The item must be collected or shipped no later than one week after the end of the auction.

We charge a storage fee of €20 per day for overdue days.