Height-adjustable pile jetty 6.8 m, T-model with 3×2 m end section., Mikkeli

Now selling the last warehouse models manufactured in 2025; only 2 jetties remain and this is the first.

End section size: width 3 m, length 2 m.

Note! The four lifting winches shown in image no. 5 are not included; they can be purchased separately.

Very sturdy! Height‑adjustable pile jetty. Supplied as a ready assembled package with brown treated timber decking.

The decorative cap on the pile has changed; the new model is shown in the last two pictures.

The jetty is ideal for those who want a jetty that is sturdy and does not sway even in waves.

Height adjustment is very easy — you only need a 19 mm spanner. Using winches the jetty can be raised or lowered with ease.

If the water level varies more than 30 cm, height adjustment is recommended so the jetty does not sit too high above the water. Height adjustment also makes it easy to level the jetty even if the seabed is uneven.

If the ice does not move during winter, the jetty should be raised well above the water level in autumn.

Note! The jetty is available for immediate collection or we can store it free of charge until 8 May 2026.

The jetty is suitable for hard‑bottom shores; it cannot be installed on muddy bottoms.

For more information about our jetties call Esa on +358 50 517 4702

See more at ESALAITURIT.FI

All our products are manufactured at our factory in Mikkeli.

Images may show accessories that are not included in the auctioned item, such as swim ladders, railings, benches, additional walkways and lifting winches.

CONTENTS OF DELIVERY

• 1 pcs end section, size 3×2 m, with very strong hot‑dip galvanised steel brackets at the corners for the pile legs

• 4 pcs 2 m high marine‑grade aluminium pile legs, max. water depth 1.5 m (longer available at extra cost)

• 2 pcs hot‑dip galvanised steel hinge "female side"

• 4 pcs hot‑dip galvanised steel base plates, plates adapt to the shape of the seabed

• 4 pcs black protective sleeves H = 1.5 m (can be shortened to required length)

• 4 pcs black polyurethane decorative caps for the top of the piles

• 1 pcs walkway size 1.2×4.8 m

• 2 pcs hot‑dip galvanised steel hinge "male side"

• Total length 6.8 m

• Frame timber treated wood 48×148 mm

• Decking treated wood 21×95 mm brown, smooth, fixed with stainless screws (decking as removable elements)

The decking is provided as removable elements to make installation easier.

Accessories such as swim ladders, lifting winches, railings and mooring fittings can be purchased when collecting the jetty.

It is possible to order additional walkways separately if the shore is very shallow and a longer jetty is required.

We provide guidance and installation instructions at collection and can assist with loading the jetty onto transport.

The jetty can be transported easily on a 4 m long trailer.

If required, transport and installation services can be ordered from us at an additional cost.