SCM XRT 130 wide-belt sander, Raisio

, 050349 - 380 V 50 Hz

- equipped with three sanding units:

- one transverse sanding belt and pressure foot unit

- one sanding drum unit

- one segmented pressure-foot unit

- maximum working width                                     mm                1300

- maximum workpiece thickness                 mm                160

- minimum workpiece thickness                 mm                3

- minimum working length                                     mm                350

- sanding belt dimensions                                mm   2620 x 1315

- transverse sanding belt length                mm                5500

- transverse sanding belt width               mm                150

- Chevron back-up belt length                   mm                4330

- Chevron back-up belt width                   mm                140

- transverse belt speeds                   m/s             3.5 / 7 / 14

- 2nd unit belt speed                   m/s            22

- 3rd unit belt speed                   m/s            18

- feed belt speed        m/min           4.5-23

- cross-belt unit motor power             kW  3.4 / 4.5 / 9.7

- 2nd sanding unit motor power            kW                  14.9

- 3rd unit motor power                      kW                  11.2

- feed drive motor power                    kW                  2.2

- operating pressure                                            bar                 6

- air consumption                                         Nl/min           430

- number of dust hoods:

- longitudinal sanding belts Ø 195 mm     pcs                 3

- transverse sanding belt Ø 160 mm     pcs                 2

- exhaust air requirement (4 suction heads)              m3/h              2500

- net weight                                              kg                  3600

- machine dimensions                                          mm                2101 x 2784 x 2625

Construction and standard equipment:

- 1st unit: transverse belt unit equipped with an electronically segmented pressure foot;

the shoe consists of 24 segments, each controlled separately by a microprocessor.

Complete with belt cleaning nozzles.

- 2nd unit: 85 SH sanding drum unit; drum is rubber-covered with a diameter of 320 mm.

- 3rd unit: flexible, segmented pressure-foot unit; shoe consists of 24 segments. Hard shoe.

The shoe's automatic up/down is synchronised with the feed belt speed

- separate control unit

- automatic ON/OFF of sanding units from the control unit

- machine status indicators on the control panel: emergency stop - motor overload -

     operating pressure - brake condition

- 2620 mm long sanding belt with safety limit switch to protect the belt

  from transverse movements and indirect tension

                      - robot-welded and ground, extra‑strong special frame

- table lifting via four robust, threaded parallelogram columns

                      with double attachment to the frame

                      - pneumatic belt tensioning and centring

                      - electronic belt oscillation to reduce compressed air consumption

                      - dynamic balancing of all rotating parts

                      - motorised table adjustment, digital thickness display and table travel

safety limit switches

                      - automatic table positioning device with movable foot control

                      - 70 SH rubber feed belt with 2.2 kW drive motor

                      - feed belt speed control from the control panel with digital display

                      - integrated dust extraction collar right at the working area

- full-width support tables at the in- and outfeed ends equipped with safety devices

                      - automatic centring of the feed belt

                      - digital ammeters for the three main motors

                      - automatic brake for rapid stopping of sanding units

                      - undervoltage protection and motor protection switches for main motors

                      - lockable main switch

                      - emergency stop switches in service hatches

                      - mechanical interlock protection in contactors

                      - emergency stop switch at the rear of the machine

101823          - safety devices in accordance with Finnish regulations

211279          - segmented support table; table fitted with 6 independent segments for sanding

painted and raw surfaces (removal amount can be preset across the whole surface

even if workpiece thickness varies up to 1 mm).

331276          - clamping shoes lined with steel plates for sanding solid wood and/or veneered

boards

470261          - oscillating belt cleaning nozzles with service units for 2nd unit

470262          - oscillating belt cleaning nozzles with service units for 3rd unit

331527          - electronically controlled segmented shoe on 3rd unit comprising 24 separately

controllable segments; controlled by microprocessor and synchronised with the feed

belt speed

331267          - cleaning brush drum with 0.75 kW motor;

dust extraction collar Ø 160

333087          - infeed support rollers for long workpieces

333089          - outfeed support rollers for long workpieces

411549          - 2-speed belt on 3rd unit 20 and 10 m/s, motor power 14.9/11.9 kW

971323          - 2nd unit motor 26 kW

Sold as seen at the time of sale. Has been in storage for an extended period.

MUST BE COLLECTED BY 27 February 2026