POWERFUL Yona ozonator + ioniser 40,000 mg/h for small to 1–400 m² spaces, new, warranty + HOLD mode, Kalajoki

We have a long history as servicers and sellers of ozone devices. Ask if you have any questions about the ozonator: 0400682012

Ozonator power and number of ozone plates and power supplies

60,000 mg/h: 6 pcs double-sided ozone plates and 3 power supplies.

40,000 mg/h: 4 pcs double-sided ozone plates and 2 power supplies.

20,000 mg/h: 4 pcs single-sided ozone plates and 1 power supply.

10,000 mg/h: 2 pcs single-sided ozone plates and 1 power supply.

If the unit you buy is claimed to produce negative ions, check that it contains the ion-producing component shown in the last picture.

Information about this unit.

See at the same time what happens inside the device.

The ioniser is an essential addition to the unit — it gives you cleaner air to breathe; read more at the end of the listing.

This unit has an improved ioniser with an output of 24,000,000 negative ions/cm3

DID YOU KNOW THAT AN IONISER ALSO INCREASES PERFORMANCE COMPARED WITH AN OZONATOR ALONE

Yona ozonators use the latest technology. Powerful ozone generators are fitted into a small housing so the unit remains compact and easy to carry while still delivering power.

This unit has two such ozone generator packages (see last pictures). Robust power: 40,000 mg/hour.

The Yona ozonator does not produce toxic nitrogen oxides — the ozone it produces displaces oxygen and in an oxygen-deprived environment all odour-causing bacteria and viruses are destroyed.

Whether the space is large or small, here is a powerful ozonator ready to work.

DO NOT TAKE RISKS — BUY A POWERFUL OZONATOR

See at the same time what happens inside the device.

The faster the ozonation, the safer it is.

Works well for cleaning cars, small spaces and even areas up to 400 m².

Simple to use: plug into the wall and set the time 1–60 min or set to HOLD (always on), leave the area and that's it.

SAVE TIME AND MONEY — BUY A POWERFUL OZONATOR.

Here is a comparison of ozonation times:

unit:                        20,000 mg   40,000 mg

ozonation time:        10 hours      5 hours

HOLD/CONTINUOUS MODE IS IMPORTANT — YOU DO NOT NEED TO KEEP ADDING TIME BETWEEN USES.

The package includes instructions for car ozonation, cottage use, ionisation, etc.

OVER 30 YEARS' SERVICE. QUICK MAINTENANCE AND SPARE PARTS AVAILABLE DIRECTLY FROM STOCK.

FAST DELIVERY

* CE APPROVED
* POWERFUL 40,000 mg / h
* TIMER: 0 - 60 min / HOLD = CONTINUOUS
* REMOVES ODOURS FROM VEGETABLES, FRUIT, KITCHENS, VIRUSES, BACTERIA, MOULD, ETC.
* REMOVES FIRE DAMAGE ODOURS, CHEMICAL ODOURS AND OTHER STRONG ODOURS; USEFUL FOR MOULD DAMAGE REMOVAL IN HOUSES
* STAINLESS STEEL CASE / PLASTIC
* REMOVES ODOURS FROM CARS, BOATS, BASEMENTS, ETC.
* DISINFECTS SAUNAS AND WET ROOMS
* USERS INCLUDE MUNICIPALITIES, CITIES, CAR DEALERS, BUS COMPANIES, CONSTRUCTION COMPANIES, CLEANING COMPANIES, HOTELS, MOTELS, CAMPSITES, PLANT HIRE COMPANIES, ETC.
* VERY EASY AND SIMPLE TO USE
* INSTRUCTIONS IN FINNISH
* 12-month WARRANTY

Dimensions: 250 × 210 × 190 mm

SERVICE AND SPARE PARTS FROM US 0400682012

ABOUT IONISATION:
Negative ions produced into indoor air cause light, positively charged particles in the air to clump together, forming larger and heavier particles that settle quickly out of the breathing zone.

Negative ionisation also breaks down volatile organic compounds in the air, which are harmful when inhaled. Toxic compounds produced by microbes (microbial toxins) mixed into the air as aerosols represent a severe health hazard when they reach the lungs and bloodstream. Heavy microbial toxins that do not mix into the air typically cause harm only via spores, which are the producers of these dangerous toxins.

The effectiveness of ozone (O3) and negative air ionisation is based on high concentrations.

When a device produces both ozone and negative ions, its effectiveness is 5–10 times better than ozone alone, and high concentrations remove spores and odours effectively even from porous materials such as upholstered furniture and bedding.

Fine particles in indoor air pose a serious health risk in homes and workplaces.

Harmful fine particles travel into the lower parts of the lungs (alveoli) with inhaled air and then into the bloodstream, causing serious health problems in addition to asthma and allergies.

Ozonation and negative air ionisation cleanse indoor air of harmful fine particles and additionally remove bacteria, moulds, viruses and various gases.

The listed indoor air contaminants are removed by ozone and negative air ion treatment:
Ozone     Negative air ionisation
Chemicals
Benzene
Exhaust fumes
Smoke
Vegetative microbial cells   Dust
Carbon monoxide   Dead skin
Mould spores
Pollen   Nicotine
Mould spores
Gases and fumes
Bacterial spores
Viruses
Pet dander
Ammonia   VOC volatile organic compounds
Tobacco smoke
MVOC compounds
Chemicals
Sewer odour   Oil odour
Solid particulates   Phenol
Dust mite
Propane
Stale air   Ether
Vegetative (growing) microbial cells
Sewer odour
 Bacterial spores  

    Ozonation and negative air ionisation work especially effectively in a positively pressured building.

    Ozone and negative air ionisation together produce compounds that can effectively remove microbial spores and various odours, for example sewer gases, smoke odours, bacterial and mould toxin smells, and stubborn cooking and tobacco odours.

    Ozone and negative air ionisation also remove fine particles and MVOC (Microbial Volatile Organic Compounds) and VOCs (Volatile Organic Compounds) from the air.

    Ozonation and negative air ionisation create a pleasant, easy-to-breathe indoor environment where people feel comfortable.

Indoor ozonation cannot be performed while people are present because ozone is produced in large quantities to destroy microbial spores. With high ozone concentration combined with negative ionisation, good cleaning results are achieved even in porous materials. After air cleaning, the ozonated space is ventilated before occupants return.

The product can be inspected before the auction ends.

Products are sold as they are at the time of auction and/or sale. Auction items have no warranty unless expressly stated. The descriptions given are the seller’s assessments of the item’s condition. The buyer must inspect the item and its functions before making a binding bid. If the buyer does not accept these auction terms they should not bid. The seller reserves the right to accept or reject the highest bid.

The item must be collected/shipped no later than one week after the end of the auction.

For overdue days we charge a storage fee of 20 € / day.