POWERFUL Yona ozone generator + ioniser 40,000 mg/h for small and 1–400 m² spaces, new, warranty + HOLD position, Kalajoki

We have a long history as service and sales provider for ozone devices. Ask us if you have any questions about the ozone generator: 0400682012

Ozone outputs and numbers of ozone plates and power supplies

60,000 mg/h – 6 pcs double-sided ozone plates and 3 power supplies.

40,000 mg/h – 4 pcs double-sided ozone plates and 2 power supplies.

20,000 mg/h – 4 pcs single-sided ozone plates and 1 power supply.

10,000 mg/h – 2 pcs single-sided ozone plates and 1 power supply.

If the unit you buy is claimed to produce negative ions, check that the unit contains the ion-producing component shown in the last picture.

Information about this unit.

See also what is happening inside the device.

The ioniser is an essential addition to the unit; it gives cleaner breathing air in your spaces — see details at the end of the listing.

This model has an improved ioniser with an output of 24,000,000 negative ions/cm3

DID YOU KNOW THAT AN IONISER ALSO INCREASES THE EFFECTIVENESS COMPARED WITH AN OZONE GENERATOR ALONE

Yona ozone generators use the latest technology. Powerful ozone producers are fitted into a compact housing for small spaces. Handy to carry and move, yet still powerful.

This unit has two such ozone-production modules (see last photos). Robust output 40,000 mg/hour.

The Yona ozone generator does not produce poisonous nitrogen oxides; the ozone produced displaces oxygen and in an oxygen-deprived environment odour-causing bacteria and viruses are destroyed.

Whether the space is large or small, here is an effective ozone generator ready to work.

DO NOT PLAY — BUY A POWERFUL OZONE GENERATOR AT ONCE

See what happens inside the unit at the same time.

The faster the ozonation, the safer it is.

Suitable for cleaning cars, small spaces and even areas over 400 m².

Very simple to use: plug in and set the timer 1–60 min or backwards to HOLD (continuous on), leave the area and that’s it.

SAVE TIME AND MONEY, BUY A POWERFUL OZONE GENERATOR.

Here is a comparison of ozonation times:

unit:                       20,000 mg   40,000 mg

ozonation time        10 hours       5 hours

HOLD/CONTINUOUS ON POSITION IS IMPORTANT — YOU DO NOT NEED TO ADD TIME BETWEEN USES.

The package includes instructions for car ozonation, cabins, ionisation, etc.

OVER 30 YEARS OF SERVICE. FAST SERVICE AND SPARE PARTS AVAILABLE DIRECTLY FROM STOCK.

FAST DELIVERY

* CE APPROVED
* POWERFUL 40,000 mg / h
* TIMER: 0 - 60 min / HOLD = CONTINUOUS ON
* REMOVES ODOURS FROM VEGETABLES, FRUIT, KITCHENS, VIRUSES, BACTERIA, MOULDS, ETC.
* REMOVES SMOKE DAMAGE ODOURS, CHEMICAL ODOURS AND OTHER STRONG SMELLS, SUITABLE FOR REMOVAL OF MOULD DAMAGE IN HOMES
* STAINLESS STEEL HOUSING / PLASTIC
* REMOVES ODOURS FROM CARS, BOATS, BASEMENTS, ETC.
* DISINFECTS SAUNAS AND WET ROOMS
* USERS INCLUDE MUNICIPALITIES, CITIES, CAR DEALERS, COACH OPERATORS, CONSTRUCTION COMPANIES, CLEANING FIRMS, HOTELS, MOTELS, CAMPSITES, PLANT HIRE, ETC.
* VERY EASY AND SIMPLE TO USE
* INSTRUCTIONS IN FINNISH
* 12 months warranty

Dimensions: 250 × 210 × 190 mm

SERVICE AND SPARE PARTS FROM US 0400682012

ABOUT IONISATION:
Negative ions produced into indoor air attach to light, positively charged airborne particles, causing the formed larger and heavier particles to fall quickly out of the breathing zone.

Negative ionisation also breaks down volatile organic compounds in the air, which are very harmful when inhaled indoors. Toxic compounds produced by microbes — microbial toxins — mixed into indoor air as aerosols form a serious health risk when they reach the lungs and then the bloodstream. Heavy microbial toxins that do not mix into the indoor air cause harm mainly via spores, which are the producers of these dangerous toxins.

The effectiveness of ozone (O3) and negative ionisation is based on high concentrations.

When the device produces negative ions in addition to ozone, efficacy is 5–10 times better than ozone alone and high concentrations remove spores and odours effectively even from porous materials, e.g. upholstery and bedding.

Fine particles in indoor air pose a serious health risk in homes and workplaces.

Harmful fine particles enter the bloodstream via the lower parts of the lungs (alveoli) and cause serious health problems in addition to asthma and allergies.

Ozonation and negative ionisation remove harmful fine particles from indoor air as well as bacteria, moulds, viruses and various gases.

The listed indoor air impurities are removed by ozone treatment and negative ionisation:
Ozone   Negative ionisation
Chemicals
Benzene
Exhaust gases
Smoke
Vegetative microbial cells   Dust
Carbon monoxide   Dead skin
Mould spores
Pollen   Nicotine
Mould spores
Gases and fumes
Bacterial spores
Viruses
Pet dander
Ammonia VOC – volatile organic compounds
Tobacco smoke
MVOC compounds
Chemicals
Sewer smell Oil odour
Solid fine particles Phenol
Dust mite
Propane
Stale air
Ether
Vegetative (growing) microbial cells
Sewer smell
Bacterial spores  

    Ozonation and negative ionisation work particularly effectively in an over-pressurised building.

    Ozone and negative ionisation together form compounds that can effectively remove microbial spores and various odours — for example sewer gases, smoke, bacterial and mould toxin odours, and stubborn smells from cooking and smoking.

    Ozone and negative ionisation also remove fine particles and MVOC and VOC compounds.

    Ozonation and negative ionisation create a pleasant, easy-to-breathe indoor air; people feel comfortable in such clean spaces.

    Together they produce very clean indoor air suitable for workspaces.

Indoor air ozonation cannot be performed while people are present because ozone is produced massively to destroy microbial spores. High ozone concentrations combined with negative ionisation achieve good cleaning results even in porous materials. After cleaning, the treated space is ventilated and occupants can return.

You can inspect the product before the auction ends.

Products are sold in the condition they are in at the end of the auction and/or sale. Auction items have no warranty unless explicitly stated. Listings are the seller’s estimates of condition only. The buyer is responsible for checking the item’s condition and functionality before making a binding offer. If the buyer does not accept these auction terms they should not bid. The seller reserves the right to accept or reject the highest bid.

The item must be collected/shipped no later than one week after the end of the auction.

For overdue days we charge a storage fee of €20 per day.