Cross-line laser – compact laser device projecting vertical and horizontal lines, Isokyrö

New

The cross-line laser is a compact laser tool for projecting a visible horizontal and vertical reference cross.

The device is designed to assist with alignment, levelling and simple layout tasks.

It produces an accurate laser cross to help position fittings, tiles, cabinets, shelves and frames on walls and floors. Its compact size makes the tool easy to carry and set up on small tripods, ledges or flat surfaces at a worksite or at home.

Benefits:

The cross-line laser provides clear, intersecting horizontal and vertical lines for quick visual alignment without manual measuring. Its compact design allows convenient transport and placement in tight spaces. Simple operation reduces installation time, while the projected cross improves accuracy when positioning items consistently during installation and finishing work.

Suitable for

Aligning tiles and floor patterns

Positioning wall cabinets, shelves and picture frames

Basic levelling of walls and mouldings

Installing light fittings in homes and small renovation projects

Key technical specifications

Projection: single cross (horizontal + vertical)

Laser type: visible red laser

Design: compact, handheld/tabletop

Power supply: battery-operated for portable use

Typical applications: indoor alignment, layout and levelling

Instructions for use

Place the laser on a stable surface or attach it to a tripod or magnetic base, if available. Switch on the device and allow the laser to project horizontal and vertical lines onto the work surface. Adjust the tool’s position until the projected cross is aligned with the reference marks. For most tasks, move the tool along the surface or reposition it to project the cross at the desired height and location. Switch off the device after use and store it in a protective case or box to prevent damage to the emitter.

Usage recommendations

Use the cross-line laser indoors under moderate lighting for the best visibility. Wear suitable eye protection when working near the laser beam and avoid direct exposure to the eyes. For improved stability and repeatable results, use a small tripod or secure mounting, and check the alignment with a spirit level or tape measure when accuracy beyond visual alignment is required.

See image.

Fast delivery with Matkahuolto.