Other brand 4-axis CNC router 2500 mm × 1250 mm × 500/180 mm, Kirkkonummi

4-axis CNC router 2500 × 1250 mm × 505/180 mm – very little use

For sale: a very lightly used 4-axis CNC router + chip extractor + fine-dust extractor as a complete machining package.

The machine was manufactured in 2021 and commissioned in 2022. After the original project was cancelled, it has accumulated only approximately 150–200 operating hours / 7 machining projects.

Machine

Working area X 1250 mm × Y 2500 mm

Practical Z working area approx. 180 mm

4th axis, rotating around the Y-axis at spindle height. Can machine workpieces larger than the tool length.
Spindle 9 kW

Bridge clearance 505 mm

12-position automatic tool changer

ISO30-ER32-060L collet system

Automatic tool-length measurement

Vacuum table, divided into 5 zones

Automatic oil feed for the guide rails

LNC/MW 2200 controller

Controller, display, keyboard and mouse in a separate control cabin
Length 3.35 m Width 2.2 m height 2.3 m

Included

Collets, chucks and cutters, replacement purchase value >> €2,000

Holzmann ABS 3000 SE chip extractor, flexible extraction hose and support system (requires 1 m of trailer length)

Trotec TTV 4500 HP extractor for fine-dust removal + 2 × 3 m dust bags.

Plywood and other machining materials (Sikablock)

The package is ideal, for example, for CNC manufacture of moulds, models, signs, plaques and all kinds of prototypes. Suitable materials include wood, MDF, HDF, model materials (Sikablock, Necuron, etc.), foams, plastics and composites. Also suitable for contour cutting somewhat thicker plywood and aluminium sheets and similar materials.

The machine is unused and located in Veikkola, Kirkkonummi, and is being sold as surplus.
Suitable for transport on a flatbed vehicle with a tarpaulin. Estimated weight 2,500 kg. A forklift is available on site for loading by arrangement.