Pipe-pontoon jetty 6 x 3.15 metres + gangway 5 x 1.2 metres (DIY), Hirvensalmi

Quality jetty now in parts - save by building it yourself!

Very popular jetty. Its large surface area and low deck height make it pleasantly stable. High-quality components complete the product.

Side cladding with two boards creates an elegant look. Decking: green or brown smooth treated timber

Pipe-pontoon jetty 6 x 3.15 metres Ø400 + gangway 5 x 1.2 metres in parts

* Overwinters in the water

* Well suited for swimming, leisure and boat use

* Stylish and representative jetty

* High-quality components

* Colour: green or brown treated timber

* Side-clad with two boards (28 x 145 mm)

* If required we can also build the product for you and deliver and install it turnkey

* We can store the product free of charge until 31 August 2026

* The jetty is delivered in parts and can be easily assembled by yourself (timber cut to size except side cladding boards)

* Can be transported easily with a minimum 3.5 m long open trailer (best is a flatbed type, e.g. car trailer) - we assist with packaging

The assembled price of the jetty is €5,450!

Detailed product information:

• Total surface area: 24.9 m²

• Total length: 11 m

• Width: 3.15 m

• Deck section size: 6 x 3.15 m (length x width)

• Gangway size: 5 x 1.2 m (length x width)

• Total weight: approx. 950 kg

• Draft without load: approx. 20 cm

• Deck height above water without load: approx. 40 cm

• Pipe pontoon diameter: Ø 400 mm

• Pontoon wall thickness: 9.8 mm

• Deck-section pipe pontoons: 2 pcs (5800 mm)

• Gangway pipe pontoon: 1 pc (1200 mm)

• Pipe pontoons are made of strong frost- and ice-resistant HDPE plastic

• Pipe pontoons also resist abrasion well

• Frame fastened with plastic flanges, will not loosen or rust

• Frame: pressure-treated timber (48 × 123 mm)

• Cross beams: sturdy pressure-treated timber (100 × 100 mm)

• Deck: pressure-treated boards (28 × 120 mm)

• Deck board material: green or brown smooth treated timber

• Side-clad with two boards (28 × 145 mm)

• Deck board fixings: stainless steel screws

• All metal parts are hot-dip galvanised steel

• Can also be installed as a T-shaped jetty

• Anchoring loops at the shore end for chains

• Anchoring loops at the lake-side end for chains

• Easy to assemble, instructions included!

Images include accessories (swim ladder, railings, anchoring equipment, 3-board cladding, bollards etc.) and are example photos of the finished product.