Heat-retaining stove, complete accessory kit, Warma-Uunit Valkea 75 with stone shelf, Uusikaupunki

Heat-retaining stove Valkea 75 Basic with steel door and stone shelf (accessory kit without installation) - Corner model

RRP with these accessories (accessory kit with double circulation, ignition flap and stone details) €3,935

The Valkea Basic with a steel door is a compact heat-retaining stove that is nevertheless a very effective heater. Thanks to the white plaster finish and the large glass door, the stove fits many interiors. The stone shelf and tiles above the door give the appliance a unique look. The stone is fully ground domestic granite (Taivassalo red). With the corner base the stove sits nicely in the corner of a room. If you do not like the white plaster, the stove can be painted in the colour you want, e.g. with Teknoksen superlatex paint. High-quality, dimensionally accurate elements are manufactured from a highly heat-retaining refractory mass at Warma-Uunit Oy’s Uusikaupunki factory.

NOTE! This is not a ready-to-use stove but an accessory kit from which the stove can be built. Very clear installation instructions are included. If needed, installation advice is available from the factory by phone during weekdays.

If collection is only possible later, storage is available for a small cost of €50 per month until summer.

You can also order various optional accessories for the product before collection. Such accessories include extra risers. Adding accessories may affect possible delivery time. Ask the factory for details if necessary.

The Valkea 75 Basic with steel door includes all insulation, mortars, finishing mortars, the stone shelf and tiles, doors and other accessories required for installation. The accessory delivery also includes glass fibre mesh for finishing. The flue is not, of course, included.

The environmental friendliness and efficiency of Warma-Uunit’s Puupihi appliances are based on a patented air-supply system and a highly heat-retaining structure, which ensure maximum benefit from even a small amount of wood.

Valkea 75 Basic with stone details and corner model

• Height: approx. 1,700 mm

• Width: 750 mm + finishing + stone shelf

• Weight: approx. 1,100 kg

• Heating area: 35–60 m²

• Flue size: min. ⌀150 mm, or half-brick flue, T400 (Note! For new flues the regulation requirement is T600. The flue temperature class may be subject to local, building control specific requirements), see more here

• Finishing material: Antique plaster

• CE approved

• Meets Ecodesign Directive requirements

• CO emissions: 0.07 %

• Flue gas temperature: 128 °C

• Clearance to sides and rear: 100 mm

• Firewood amount: 6 kg per heating cycle

• Efficiency: 88 %

• Heat release duration: approx. 24 h

• Energy class: A+

Equipment of the model for sale and additional information:

• Top or rear connection (flue connection from the top, side or rear of the stove, or flue above the stove)

• Ignition assistance flap to bypass a smoke circuit

• Body elements, installation insulation and glass fibre mesh

• Mortars and finishing materials required for installation (masonry mortar, fire mortar, mesh mortar, antique plaster, stone shelf and tiles)

• Puupihi appliance with traditional cast-iron grate (grates are included in the sale)

• Three-piece steel lower section painted black (soot doors and ash box with lids)

• Steel black glass door

• Installation instructions

• Other optional accessories available for separate purchase can be requested from the factory

  
  

Delivery: 3 euro pallets

Affordable appliance, budget stove, cheap appliance, cheap stove