Heat-storing fireplace, complete kit, Warma-Uunit Valkea 100, Uusikaupunki

Heat-storing fireplace Valkea 100 Basic with steel door and sharp front corners (kit without installation)

RRP with these accessories (kit with double circulation, ignition bypass plate and sharp front corners) €4,495

The Valkea 100 Basic is a modern heat-storing fireplace. The large glass door of the roughly one-metre-wide stove opens a wide, atmospheric view of the fire into the surrounding space. The large firebox can comfortably take a slightly longer log placed crosswise. Thanks to the white plaster finish and the large glazed door, the stove suits many interiors. If white is not to your taste, the plaster surface can be painted in the desired colour, e.g. with Teknos superlatex paint. High-quality, dimensionally accurate elements are manufactured from a highly heat-retentive refractory mass at Warma-Uunit Oy's factory in Uusikaupunki.

NOTE! Not a ready-to-use stove, but a kit from which a stove can be assembled. Clear assembly instructions are included. If needed, the factory can give installation advice by phone during office hours.

If collection is only possible later, storage is available for a small fee of €50 / month until summer.

You can also order various accessories for the product separately before collection. Such accessories include, for example, extra risers. Ask the factory for details if needed.

Valkea 100 Basic includes all materials required for installing the stove: insulation wool, mortars, finishing mortars, doors and other fittings. The kit also includes a glass-fibre mesh for the finish. The flue is not included in the delivery.

The eco-friendliness and efficiency of Warma-Uunit's Puupihi appliances are based on a patented air-supply system and a highly heat-retentive construction, which extract maximum benefit even from small amounts of wood.

Valkea 100 Basic

• Height: approx. 1,700 mm

• Width: 970 mm + coating

• Weight: approx. 1,250 kg

• Heating area: 40–70 m²

• Flue size: min. ⌀150 mm, or half-brick flue, T400 (Note! For new flues the regulation requirement is T600. The flue temperature class may be subject to local building control requirements), see more here

• Finishing material: Antique mortar

• CE approved

• Meets Ecodesign Directive requirements

• CO emissions: 0.12%

• Flue gas temperature: 158 °C

• Safety distance to sides and rear: 100 mm

• Fuel load: 6 kg

• Efficiency: 81%

• Heat release duration: approx. 24 h

• Energy class: A+

Accessories and additional information for the model on sale:

• Top or rear connection (flue connection from the top, the side or rear, or flue on top of the stove)

• Ignition bypass plate to bypass the smoke circulation

• Body elements, installation insulation and glass-fibre mesh

• Additional corner elements = sharp front corners

• Mortars required for installation (masonry mortar, refractory mortar, mesh mortar, antique finish mortar)

• Puupihi appliance with traditional cast-iron grate (grates included in the sale)

• Steel, black 3-piece lower set (soot doors and ash box with lids)

• Steel, black glass door

• Installation instructions

  
  

Delivery: 3 euro pallets

Affordable appliance, inexpensive fireplace, cheap stove