Exhibition container (transportable by hook-lift truck), Kangasala

This glass‑walled container is primarily built for exhibition use and constructed with a steel tube frame and corrugated steel panel walls. Both long sides have openings fitted with lockable sliding glass doors, giving access from either side. A personnel door is fitted at one end.

The container is fully insulated with Finnfoam, and the walls and roof are lined with white marine plywood. The plywood floor is covered with a commercial vinyl sheet with welded seams.

Electrics include numerous sockets, ceiling lights, spotlight rails on both long sides, switches, a power feed and a distribution board. An air‑to‑air heat pump is installed at one end.

To ease handling the container has forklift pockets, ground‑lowering rollers and 160 mm swap‑body rails with a heavy‑hook attachment.

• External dimensions: length 7 m × width 3.4 m × height 2.6 m

• Custom built on a container structure

• Insulation — floor (under the container floor plate) + walls + roof: 50 mm Finnfoam

• Lining: walls + roof 12 mm white marine plywood (butt‑jointed and through‑screwed), floor plywood

• Lockable sliding glass doors on both long sides: 5.5 m

• Swap‑body rails 160 mm + heavy‑hook head + ground‑lowering rollers

• Forklift pockets on the long side

• Electrics: 11 twin sockets in designated positions, 380 V / 16 A feed, distribution board, 2 ceiling lights, spotlight rails on both long sides in the ceiling 2 × 6 m — incl. 2 × 5 spotlights, separate switch for each

• Flooring: grey commercial vinyl with welded seams

• Air‑to‑air heat pump at one end

• Painted blue (RAL 5000)

• Roof‑mounted frame with illuminated sign

• Very lightly used, like new

Viewable at Somerotie 8, Kangasala

More information: Mika Kähäri 040-1246267