POWERFUL Yona ozone generator + ioniser 40,000 mg/h for small to 1–400 m² spaces, new, warranty + HOLD mode, Kalajoki

We have a long history as service and seller of ozone equipment. Ask us if you have any questions about an ozone generator, 0400682012

Ozone generator outputs and numbers of ozone plates and power supplies

60,000 mg/h: 6 double-sided ozone plates and 3 power supplies.

40,000 mg/h: 4 double-sided ozone plates and 2 power supplies.

20,000 mg/h: 4 single-sided ozone plates and 1 power supply.

10,000 mg/h: 2 single-sided ozone plates and 1 power supply.

If the unit you buy is promised to produce negative ions, check that the unit contains the ion-producing component shown in the last picture.

Information about this unit.

See also what is happening inside the unit.

The ioniser is an essential addition to the unit — it gives cleaner breathing air; read the details at the end of the listing.

This unit has an upgraded ioniser producing 24,000,000 negative ions/cm3

DID YOU KNOW THAT AN IONISER ALSO INCREASES PERFORMANCE COMPARED WITH OZONE ALONE

Yona ozone generators use the latest technology. Powerful ozone producers fit into a small housing, keeping the unit compact. Handy to carry and move, yet powerful enough.

This unit contains two such ozone production modules (see last pictures). Substantial power: 40,000 mg/hour.

The Yona ozone generator does not produce toxic nitrogen oxide; the ozone produced displaces oxygen and, in oxygen-deprived conditions, odour bacteria and viruses are killed.

Whether the space is large or small, this powerful ozone generator is ready to work.

DO NOT HESITATE — BUY A POWERFUL OZONE GENERATOR

See also what is happening inside the unit.

The faster the ozonation, the safer.

Good for cleaning cars, small spaces and even areas up to 400 m².

Simple to use: plug into the wall, set the time 1–60 min or turn to HOLD (always on), leave the area and that’s it.

SAVE TIME AND MONEY, BUY A POWERFUL OZONE GENERATOR.

Here is a comparison of ozonation times:

unit:                         20,000 mg    40,000 mg

ozonation time            10 hours     5 hours

The HOLD/ALWAYS ON POSITION IS IMPORTANT — YOU DO NOT NEED TO ADD TIME BETWEEN USES.

The package includes instructions for car ozonation, cottage use, ionisation, etc.

OVER 30 YEARS OF SERVICE. QUICK MAINTENANCE AND SPARE PARTS AVAILABLE DIRECTLY FROM STOCK.

FAST DELIVERY

* CE approved
* POWERFUL 40,000 mg / h
* TIMER: 0–60 min / HOLD = ALWAYS ON
* REMOVES ODOURS FROM VEGETABLES, FRUIT, KITCHENS, VIRUSES, BACTERIA, MOULD, ETC.
* REMOVES FIRE DAMAGE ODOURS, CHEMICAL ODOURS AND OTHER DIFFICULT SMELLS, SUITABLE FOR MOULD ISSUES IN HOUSES
* STAINLESS STEEL HOUSING / PLASTIC
* REMOVES ODOURS FROM CARS, BOATS, BASEMENTS, ETC.
* DISINFECTS SAUNAS AND WET ROOMS
* USERS INCLUDE MUNICIPALITIES, CITIES, CAR DEALERS, BUS OPERATORS, CONSTRUCTION COMPANIES, CLEANING COMPANIES, HOTELS, MOTELS, CAMPSITES, MACHINERY RENTAL COMPANIES, ETC.
* VERY EASY AND SIMPLE TO USE
* OPERATING INSTRUCTIONS IN FINNISH
* 12-month warranty

Dimensions: 250 × 210 × 190 mm

WE PROVIDE SERVICE AND SPARE PARTS 0400682012

ABOUT IONISATION:
Negative ions produced into indoor air cause light, positively charged particles to clump together; the resulting larger and heavier particles fall quickly out of the breathing zone.

Negative ionisation also breaks down volatile organic compounds in the air that are harmful when inhaled. Toxic compounds produced by microbes, mixed into indoor air as aerosols = microbial toxins, pose a serious health risk if they reach the lungs and bloodstream. Heavy microbial toxins that are not mixed into the air mainly cause harm via spores, which are the producers of these dangerous toxins.

The effectiveness of ozone (O3) and negative air ionisation is based on high concentrations.

When the unit produces negative ions in addition to ozone, effectiveness is 5–10 times better than ozone alone, and high concentrations remove spores and odours effectively even from porous materials, e.g. upholstered furniture and bedding.

Fine particles in indoor air pose a serious health threat in homes and workplaces.

Harmful fine particles travel with inhalation into the deep lung (alveoli) and from there into the bloodstream, causing serious health problems in addition to asthma and allergies.

Ozonation and negative air ionisation clean indoor air of harmful fine particles and also remove bacteria, moulds, viruses and various gases.

The listed indoor air impurities are removed by ozone and negative ion treatment
Ozone Negative air ionisation
Chemicals
Benzene
Exhaust gases
Smoke
Vegetative microbial cells Dust
Carbon monoxide Dead skin
Mould spores
Pollen Nicotine
Mould spores
Gases and fumes
Bacterial spores
Viruses
Pet dander
Ammonia VOCs (volatile organic compounds)
Tobacco smoke
MVOC compounds
Chemicals
Sewer odour Oil smell
Solid fine particles Phenol
Dust mite
Propane
Stuffy air
Ether
Vegetative (growing) microbial cells
Sewer odour
Bacterial spores

    Ozonation and negative air ionisation work particularly effectively in a pressurised building.

    Ozone and negative air ionisation together produce compounds that can effectively remove microbial spores and various odours, e.g. sewer gases, smoke smells, bacterial and mould toxin odours, and stubborn cooking and tobacco odours.

    Ozone and negative air ionisation also remove fine particles and MVOC (microbial volatile organic compounds) and VOCs (volatile organic compounds) from the air.

    Ozonation and negative air ionisation create a pleasant, easy-to-breathe indoor air; in such a clean space it is comfortable to be.

    Ozone and negative air ionisation together produce very clean indoor air also suitable for workspaces.

Indoor ozonation cannot be performed while people are present, because ozone is always produced massively to destroy microbial spores. With high ozone concentrations combined with negative ionisation a good cleaning result is also achieved for porous materials. After indoor cleaning the ozonated space is aired out, after which occupants may return.

You may inspect the product before the auction ends.

Products are sold as they are at the time of auction and/or sale. There is no warranty on auction items unless specifically stated. Descriptions in the listing are only the seller’s estimates of the item’s condition. The buyer is obliged to check the condition and functionality of the item and accessories before placing a binding bid. If a buyer does not accept these auction conditions, they should not bid. The seller reserves the right to accept or reject the highest bid.

The item must be collected/shipped no later than one week after the end of the auction.

For overdue days we charge €20/ day storage fee.