Heat‑retaining stove, complete parts kit, Warma‑Uunit Erkkeri with showroom model door, Uusikaupunki

Heat‑retaining stove Valkea Erkkeri with showroom model door (antique copper), with a base intended for a straight wall (not a corner) as shown in the floorplan. See floorplan. (parts kit only, no installation)

RRP with these accessories €4,450

Valkea Erkkeri is a compact heat‑retaining stove that still performs very well as a heater, for example in a smaller room or as a supplementary heat source. With its white rendered surface and large bay door the stove fits many interiors. If you prefer a different colour, the stove can be painted with e.g. Teknoksen superlatex paint. A shelf above the single satin‑chrome door. High‑quality, dimensionally accurate elements are manufactured from a highly heat‑retaining refractory mass at Warma‑Uunit Oy’s Uusikaupunki factory.

NOTE! This is not a ready‑to‑use stove but a parts kit from which a stove can be assembled. Very clear installation instructions are included. Installation advice by phone from the factory is available on weekdays during office hours if needed.

You can also order various additional accessories for the product separately before collection. Typical accessories include extensions. Ask the factory for details if needed.

Valkea Erkkeri includes all insulation wools, renders, finishing renders, doors and other supplies needed for installation. NOTE! The door is a showroom, discontinued model door that has not been fired. The door has no warranty. The parts delivery also includes fibreglass mesh for the finish. The flue is not included.

Warma‑Uunit Puupihi appliances’ environmental friendliness and efficiency are based on a patented air supply system and a very heat‑retaining structure, which together extract maximum benefit even from a small amount of wood.

Heat‑retaining stove Valkea Erkkeri

• Height: approx. 1700 mm

• Width: 750 mm + finish

• Weight: approx. 1300 kg

• Heating area: 35–60 m²

• Flue size: min. ⌀ 150 mm, or half‑brick flue, T400 (Note! For new flues the regulation requirement is T600. Flue temperature class may be subject to local building control requirements), see more here

• Finish material: Antique render

• CE‑approved

• Meets Ecodesign Directive requirements

• CO emissions: 0.07 %

• Flue gas temperature: 128 °C

• Clearance to sides and rear: 100 mm

• Log load: 6 kg

• Efficiency: 88 %

• Heat release time: approx. 24 h

• Energy class: A+

Equipment and additional information for the model for sale:

• Top or rear connection (flue connection from the top, side or rear, or flue above the stove)

• Ignition‑aid plate to bypass the smoke circuit

• Body elements, installation insulation wools and fibreglass mesh

• Renders required for installation (masonry render, fire render, reinforcing render and antique render)

• Puupihi appliance with traditional cast‑iron slotted grate (grates included)

• 3‑piece lower set, colour gloss chrome (soot hatches and ash box with lids)

• Single‑door glass aperture, colour satin chrome (used in the display stove, not fired, shows minor signs of use, no warranty on the door)

• Installation instructions

  
  

Delivery: 2 euro pallets