Heat-retaining fireplace, complete accessory package, Warma-Uunit Valkea 100, Uusikaupunki

Valkea 100 Basic heat-retaining fireplace with steel door and sharp front corners (accessory package without installation)

RRP with this equipment (accessory package with double circulation, lighting damper and sharp front corners) €4,495

The Valkea 100 Basic heat-retaining fireplace is a modern heat-retaining fireplace. The large glass door of this approximately one metre-wide fireplace provides a broad, atmospheric view of the fire. The large firebox comfortably accommodates slightly longer logs placed crosswise. Thanks to its white mortar surface and large glazed door, the fireplace suits many settings. If white is not to your taste, the mortar surface can be painted in a colour of your choice, for example with Teknoksen Superlatex paint. The high-quality, precisely dimensioned elements are manufactured from highly heat-storing refractory material at Warma-Uunit Oy’s factory in Uusikaupunki.

PLEASE NOTE! This is not a ready-to-use fireplace, but an accessory package from which the fireplace can be installed. Very clear installation instructions are included. If necessary, the factory can also provide installation advice by telephone on weekdays during office hours.

If collection is only possible later, storage is available at a small cost of €50/month until summer.

Various additional accessories can also be ordered separately for the product before collection. These include, for example, additional height extensions. Ask the factory for more information if necessary.

The Valkea 100 Basic includes all the wool, mortars, finishing mortars, doors and other accessories required for installation. The accessory delivery also includes fibreglass mesh for finishing. The flue is naturally not included.

The environmental friendliness and efficiency of Warma-Uunit’s Puupihi fireplaces are based on an air supply system and a highly heat-storing structure, enabling maximum benefit to be obtained from even a small amount of wood.

Valkea 100 Basic heat-retaining fireplace

• Height: approx. 1,700 mm

• Width: 970 mm + finish

• Weight: approx. 1,250 kg

• Heating area: 40–70 m²

• Flue size: min. ⌀150 mm, or half-brick flue, T400 (Please note! For new flues, the regulatory requirement is T600. The temperature class of the flue may be subject to special local requirements set by building control), see more here

• Finishing material: Antique mortar

• CE approved

• Meets the requirements of the Ecodesign Directive

• CO emissions: 0.12%

• Flue gas temperature: 158 °C

• Safety distance to the sides and rear: 100 mm

• Firewood quantity: 6 kg

• Efficiency: 81%

• Heat release time: approx. 24 hours

• Energy class: A+

Equipment and further information for the model for sale:

• Top or upper connection (flue connection at the upper side or rear of the fireplace, or flue above the fireplace)

• Lighting-assistance damper to bypass the smoke circulation

• Body elements, installation wool and fibreglass mesh

• Additional elements for the front corners = sharp front corners

• Mortars required for installation (masonry mortar, fire mortar, mesh mortar, antique mortar)

• Puupihi fireplace with a traditional cast-iron slotted grate (slotted grates included)

• Steel, black three-piece lower set (soot doors and ash pan with cover)

• Steel, black glass door

• Installation instructions

  
  

Shipment: 3 Euro pallets

Affordable fireplace, affordable stove, cheap fireplace, cheap stove