Hiab / Olsbergs Tipping Block and Danfoss – Hydraulic Components, Lieto

As pictured, a lot of high-quality Hiab, Olsbergs and Danfoss hydraulic components. The lot includes an Olsbergs VFU hydraulic valve block, several Danfoss PVG32 valve bank sections and end sections, an electrical end section and other hydraulic valve parts.

Parts included in the lot

1. Olsbergs / Hiab VFU – Tipping block

• Part number: 5492041

• Olsbergs VFU-series hydraulic supply and control unit, probably a tipping block.

• Manufacturer data for the VFU series: maximum pump pressure 450 bar and maximum flow 300 l/min.

• Includes the solenoid valves, connectors and hydraulic hose shown in the pictures.

2. Danfoss 157B5101 – PVG32 PVP pressure end section

• Closed-centre pressure/inlet end section.

• P and T ports G3/4".

• LS port G1/4".

• Rated flow 150 l/min.

• Maximum continuous pressure 350 bar, intermittent peak pressure 400 bar.

3. Danfoss 157B6203 – PVG32 PVB work section

• Pressure-compensated valve bank work section.

• LS A/B pressure-limiting functions and LS shuttle valve.

• A/B work ports G1/2".

• LS ports G1/4".

• Rated flow 100 l/min.

• Maximum continuous pressure 350 bar, intermittent peak pressure 420 bar.

4. Danfoss 157B6233 – PVG32 PVB work section

• Pressure-compensated hydraulic valve work section.

• LS A/B functions.

• Ready for installation of PVLP/PVLA shock and anti-cavitation valves.

• A/B ports G1/2", LS ports G1/4".

• Intended for Danfoss PVG32 valve bank systems.

5. Danfoss 157B6935 – PVSK32 end/shut-off module

• PVSK module for PVG32 systems.

• BSP threaded connections.

• P and HPCO ports G3/4".

• Rated flow 120 l/min.

• Maximum continuous pressure 350 bar, intermittent peak pressure 400 bar.

6. Danfoss 155L4022 – H.DI.2amp electrical controller

• Electro-hydraulic proportional controller from the Danfoss PVEH32 series.

• Marking: H.DI.2amp 155L4022.

• Operating voltage 11–32 V.

• Two 4-pin AMP connectors.

• Active fault monitoring.

• Intended for electrical control of Danfoss PVG valves.

7. Used Palfinger loader crane hydraulic block, type designation PPC N 40. Palfinger part number: EV5747

• Type: PPC N 40

• Application: Palfinger loader crane, approximately 11 tm

• Construction: Four-section hydraulic control valve assembly

• Control: Mechanical hand-lever control

• Equipment: 3 Palfinger operating levers (one missing)

• Equipment: 3 spool sensors (one missing)

• Type plate identification: 1714-002839

• Palfinger part number: EV5747

  
  

8. Other valve bank parts

• Two hydraulic blocks marked HR 2 and HR 11.

• Various intermediate and end sections for valve banks.

• Valve parts related to LS functions.

• Other hydraulic and electro-hydraulic components shown in the pictures.

The parts can be inspected in advance or further information can be requested. We are not responsible for any errors in the description. The sale includes only the parts shown in the pictures.