CURA 2500 plaster spraying machine – professional-grade machine ready to work, Loimaa

For sale: CURA 2500 plaster and render spray machine with a complete hose set. A Finnish mortar pump designed for professional use, suitable for applying various fillers, rendering compounds and other pumpable materials.

The machine is operational and ready to work right away.

Included:

• CURA 2500 plaster spraying machine

• approx. 10 m complete original hose set

• approx. 10 m extension hose with couplings

• approx. 20 m air hose

• equipment required for spraying as shown in the photos and according to the included setup

The CURA 2500 has stepless electronic speed control with a frequency converter, so the material feed rate can be adjusted precisely to the job and the material used.

Technical specifications

• Output: 1–25 l/min

• Motor: 400 V / 2.2 kW / 50 Hz

• Power supply: 16 A three-phase power

• Stepless speed control

• Maximum grain size: 4 mm

• Tank: approx. 65 litres

• Maximum pressure: approx. 25 bar

• Weight approx. 90 kg

The CURA 2500 is suitable for pumping and spraying, for example, wall and ceiling fillers, thin coatings, spray and fine render mortars, and other similar materials. The machine can be used on interior walls, ceilings, floors and façades, for example.

The included long hose set also makes the package ready for larger work sites. A total of approx. 20 metres of hose provides comfortable working distance without constantly moving the machine.

Please note: for spraying use, a sufficiently powerful air compressor is also required to provide atomising air. In the CURA 2500 manual, the recommended air volume is approx. 600–800 l/min (recommended approx. 1 m3) and pressure approx. 5–6 bar, depending on the material and capacity.

Professional machine – not a hobby tool

This is the kind of machine used for real plastering and rendering jobs on site, so you do not have to start building the equipment from scratch. The machine is operational and ready to use.

Ideal, for example, for a plastering or rendering contractor, a construction entrepreneur, or a private house builder who needs to carry out larger amounts of filling or plastering work efficiently.

The machine is sold used and shows normal wear and signs of use consistent with professional use.