Double‑thick stormwater pipe, full pallet/frame — new Class‑1 domestic double‑thick stormwater pipe, 300 m (50 poles), SN8 strength class, Riihimäki

Complete new, untouched frame of double‑thick stormwater pipe from a domestic manufacturer. 50 pieces of 6‑metre poles, total 300 metres! Completely faultless new Class‑1 pipe.

Use class SN8. Ready for installation: includes a fixed socket at the spigot end. The double‑thick stormwater pipe has an outer diameter of 110 mm. It has a double wall: a smooth inner surface improves flow and self‑cleaning, and a corrugated outer shell provides high load strength. Straight pipes set accurately to the desired slope without pockets prone to clogging.

Strength class SN8 (formerly marked T8) pipes and fittings are used where heavier loads occur, incl. trafficked areas, or when you need to ensure the pipeline remains intact under, for example, buildings or other hard‑to‑repair locations. One end of the pipe has a socket allowing direct connection to another pipe.

All 110 mm socketed drainage fittings fit the pipe. Connections are easiest with flexible fittings from 0° to 90°. A rainwater gully fits the pipe directly without extra fittings.

ASSISTANCE WITH FORKLIFT ONTO TRAILER/CAR.

Collection time must be agreed in advance. The bundle is lifted on by forklift.

Freight companies may offer an inexpensive quote for transport.

These travel well on a trailer too (the most common pickup method).

Can assist with arranging transport if needed.