WALLIUS® LMP-450 with two wire feeders, MIG/MAG welding machine, Lohja

WALLIUS® LMP-450 + 2xLM40

Used powerhouse – 450 A MIG/MAG. Equipped with two LM-40 wire feeders and a built-in water-cooling unit for the power source. Made in Finland.

The machine’s power and the water-cooled torch are suitable for all MIG/MAG welding. Suitable for repairs and manufacturing welding of machines, equipment, buckets, earthmoving machines, etc. For construction industry welding and for medium‑heavy and heavy workshop welding. Wire sizes 0.6–1.6 mm.

Two wire feeders allow versatile use. One can be fitted with 0.8 mm wire for thin‑plate work, root passes and tack welding. The other feeder, equipped with a water‑cooled Binzel torch, is for 1.0–1.2 mm wire for higher‑current welds. The wire feeder has current and voltage meters and remote control for wire feed speed.

The power source can also be used for carbon‑arc gouging at up to ~800 A.

The machine has welded stainless steel / high‑strength steel / carbon steel pressure vessels and filter units subject to the Pressure Equipment Directive (PED). The welding machine’s verification is valid until August 2026 and it is ready for welding work required by the EN 1090 standard.

The wire feeder includes a full spool of Böhler AWS ER316LSi 1.0 mm stainless welding wire (value approx. €330).

The welding machine includes a water‑cooled Binzel MB501 torch, a 70 mm² earth cable, gas hoses and the stainless wire mentioned above.

A wide range of accessories is available for the machine, such as a gouging torch, 10–30 m interconnecting cables, a balancer, suspension kit, remote controls, feed rollers for flux‑cored wires, etc.

In addition to welding machines, Wallius sells a wide selection of welding consumables and filler metals. These can be supplied at a competitive price with the machine delivery. Ask for details!