5 kW 12 V diesel/petrol engine water heater, Vantaa

Diesel/petrol water heater. The fuel is set at the first start-up.

Features:

- Protects the vehicle from damage caused by sudden temperature drops.

- Low noise: noise-damping treatment for minimal sound.

- Easy to install: compact design fits many tight spaces.

- Low fuel and power consumption for longer run times.

- Stable, automatic cabin temperature control with a preset temperature.

- With continuous monitoring and diagnostic system.

- Fuel is supplied from the vehicle's own tank.

- Suitable for various diesel vehicles such as cars, buses, motorhomes, lorries, utility vehicles, etc.

Rumour has it someone has used it to provide hot domestic water for a cottage :)

Technical specifications:

Heat output (W) 6000 W

Fuel consumption (L/h) Diesel: 0.46 L/h, Petrol: 0.52 L/h

Permitted ambient temperature/altitude: -40 °C to 80 °C, altitude ≤ 6000 m

Weight: 2.9 kg

Package includes:

1 x heater unit

1 x fuel/oil pipe (5 m)

1 x silencer/muffler

1 x exhaust pipe

1 x controller

1 x remote control

1 x intake air hose

1 x exhaust air pipe

1 x oil drain device

1 x oil filter

1 x air filter

1 x water pump

1 x oil pump

2 x oil pump clamps

1 x mounting plate

1 x remote control

1 set of screw fasteners

1 set of nylon cable ties

1 set of threaded pipe

1 x main wiring harness

English manual

⚠️ Diesel heater safety instructions

The combustion process consumes oxygen and produces hazardous exhaust gases. Incorrect installation may lead to carbon monoxide poisoning or fire.

1. Exhaust gas routing (Main rule)

• Outside only: Exhaust gases must be routed completely outside the building, tent or vehicle using a metal exhaust pipe.

• Sealing: Ensure the exhaust pipe connection to the heater body is sealed with the supplied clamp. Even a small leak into the interior can be fatal.

• CO detector: Always install a good-quality carbon monoxide (CO) alarm in the space. It is inexpensive life insurance.

  
  

2. Exhaust temperature and insulation

The exhaust pipe reaches very high temperatures in use.

• Max temperature: Diesel heater exhaust gases may reach 250–450 °C at the outlet depending on power. The metal pipe itself can glow hot.

• Feed-through: If the exhaust pipe is routed through a wall or floor, use fireproof insulation (e.g. mineral wool) or a dedicated metal feed-through sleeve. The pipe must not contact wood, plastic or other combustible materials directly.

• Clearance: Keep the exhaust pipe at least 10 cm away from any melting or combustible materials along its entire length.

  
  

3. Combustion air and heated air

• Separate air inlets: Ensure the heater's exhaust pipe is not close to the unit's own combustion air intake or the heated air intake. Otherwise the unit may draw its own exhaust back in.

  
  

4. Fuel handling

• Position the fuel tank so that in the event of a leak diesel cannot run onto the hot exhaust pipe.