Hotspring Vanguard ulkoporeallas, Jämsä
OnSeason Oy lists, Huutokaupat.com sells
€600
30 bids
1 d 15 h
Time left
AntinValinta Oy sells
Viewed 16 times
Please note that this is an automatic translation. In case of any discrepancies between the original and this translated version, the original version shall prevail.
Sprsun heat pumps are built from high-quality components with 25 years of experience. The air-to-water units have been tested in a German TÜV laboratory for COP values, heat output and sound levels.
SPRSUN heat pumps hold EN14511-compliant approvals: MCS, SAA, ROHS, TÜV, ERP, CCC, CE and CB certificates.
An air-to-water heat pump is a durable and economical heating solution.
The touchscreen control panel is easy to use and a Wi‑Fi remote control is included so you can conveniently operate the pump remotely via a mobile app.
In the Monoblock series the refrigerant circuit is fully integrated into the outdoor unit. This design ensures good thermal insulation, space savings and quiet operation. Its compact construction also makes the unit easy to install and service. As the refrigerant work is completed at the factory, on-site installation costs can be reduced: the installer only needs to make the heating system connections and required electrical work.
The heat pump is an inverter model, which saves electricity compared with ON/OFF units. An inverter-controlled unit adjusts heating power as required. A common problem with ON/OFF heat pumps is short run cycles in spring and autumn. Short cycles increase compressor starts; each start uses a lot of electricity and wears the compressor. When correctly sized, an inverter allows continuous heating for most of the season without frequent stops.
The heat pump can be controlled with a fixed temperature setpoint or an ECO setting based on outdoor temperature. Temperature is measured on the return side. For ECO you enter four outside temperatures and the required fluid temperature for each so room temperature stays stable.
The updated model has SG Ready functionality, allowing the pump’s consumption to be controlled by spot electricity prices. Using SG Ready typically requires controllers such as Shelly Pro 2 and Shelly Pro 3EM to forward the market price to the heat pump. See the wiring diagram in the product images for the connection between the heat pump and Shelly Pro 2.
The EVU function is also standard with this update. EVU allows solar panels to be integrated into the heat pump system; the pump increases heating power when solar electricity is available.
Installation (brief)
This is a Monoblock unit, so supply and return pipes are brought to the indoor buffer tank. Connections are 1" internal thread. No separate indoor unit is required. The manufacturer recommends a 60–100 litre buffer tank. A circulation pump and a dirt strainer must be fitted on the pipe to the heat pump. The strainer filters metal and plastic debris and other contaminants from the heating system fluid so they do not block the heat exchanger. An expansion vessel must be connected to the system if one is not already fitted.
You may choose a standard circulation pump or a PWM variable-speed circulation pump. The heat pump can control a PWM pump’s flow, improving efficiency.
The heat pump includes a touchscreen display panel to be installed indoors. Cable length is over 5 metres.
If you intend to heat domestic hot water with the heat pump, a separate hot-water cylinder is required. For sizing, use 50 litres per person. The cylinder must have a coil. The heat pump return pipe is connected to a three-way valve controlled by three wires. The pump opens the valve to supply DHW when the cylinder temperature falls below the hysteresis. The valve connects flow pipes to the heating circuit/buffer and the DHW cylinder. Returns from both the DHW cylinder and the buffer tank should flow freely back to the heat pump.
Model: CGK-015V3L-B inverter Monoblock VILP
Wi‑Fi remote connection
SG Ready
EVU function
Panasonic compressor
Monoblock
SPRSUN touchscreen control panel
Danfoss electric expansion valve
Voltage: 220–240 V / 50 Hz / single-phase
Refrigerant: R32
Operating temperature: -30 °C to 45 °C
Maximum heating power: 6 kW
Maximum cooling power: 5.5 kW
Functions: Heating, cooling, domestic hot water
Net weight: 59 kg
Gross weight: 70 kg
Package dimensions: L: 110 cm W: 46 cm H: 71 cm
2-year warranty
The seller undertakes to sell the item to the highest bidder.
The item is sold as a transaction between users. Huutokaupat.com does not act as a party to the transaction.
The seller of this item is the Advertiser.
Please read the Terms for Auctions Between Users applicable to this auction, and the sales terms before placing a bid.
Please note that:
For further details about the item and its sale, contact the advertiser. For other matters please contact Huutokaupat.com customer service here. If you notice incorrect information in the listing, please contact Huutokaupat.com customer service here.
Time left
No bids
Starting price €1,760
Delivery costs will be added to the price
Delivery methods and costs
Delivery costs apply to mainland Finland.
Auction ends Thu, 25/12/2025 at 12:29, or 3 min after the last bid
Item number: 5967119
Viewed 16 times
Viewing by appointment — please call to arrange.
Payment method is agreed separately with the seller.
19 Dec 2025, 11:46
OnSeason Oy lists, Huutokaupat.com sells
€600
30 bids
1 d 15 h
Time left
RK Realisointi lists, Huutokaupat.com sells
€60
3 bids
15 h 19 min
Time left
Kone Keltto Oy lists, Huutokaupat.com sells
€20
1 bid
1 d 8 h
Time left
Trading Outlet lists, Huutokaupat.com sells
€82
5 bids
5 d 16 h
Time left
Trading Outlet lists, Huutokaupat.com sells
€100
4 bids
5 d 18 h
Time left
Lapin Hullu ohjelmapalvelut Oy lists, Huutokaupat.com sells
€25
5 bids
12 d 16 h
Time left